Product Description

  • This instrument has a wide measuring range, capable of measuring the hardness of all metallic materials, and directly displaying hardness scales HRB, HRC, HV, HB, HS, HL, and three types of strength values instantly.
  • Accurate Measurement: The high-precision measurement circuit has a value error of ±0.5% (HLD=800) and a repetition rate value of 0.8%.
  • Support for Forged Steel Material: When using the impact type D device to test forged steel samples, it can directly read HB values without the need for a manual lookup table.
  • A small and portable instrument with an integrated design, improving reliability by eliminating the need for connecting cables.The hardness value has a preset upper and lower limit, with an automatic alarm activated if it goes beyond the set range, making it convenient for batch testing by the user.

Metal Leeb Hardness Tester for Alloy Tool Steel Stainless Cast Iron Metal Leeb Hardness Tester for Alloy Tool Steel Stainless Cast Iron

Pen-type Steel Hardness Tester Metal Durometer, Non-destructive hardness testing of materials. Continuous working time：About 20 hours.

Test conditions of Richter hardness tester:

The workpiece weight is not less than 2KG,

The minimum thickness is not less than 10mm,

The surface roughness is not less than 1.6um.

When the above conditions are not achieved stable support or dense coupling!

Copper-zinc-Aluminum Alloy Forged Steel Metal HL, HV, HB, HRC, HRB, HRACopper-zinc-Aluminum Alloy Forged Steel Metal HL, HV, HB, HRC, HRB, HRA

Copper-zinc-Aluminum Alloy Forged Steel Metal HL, HV, HB, HRC, HRB, HRACopper-zinc-Aluminum Alloy Forged Steel Metal HL, HV, HB, HRC, HRB, HRA

Copper-zinc-Aluminum Alloy Forged Steel Metal HL, HV, HB, HRC, HRB, HRACopper-zinc-Aluminum Alloy Forged Steel Metal HL, HV, HB, HRC, HRB, HRA

Measurement direction:

Support 360º (vertical downward, diagonal downward, horizontal, diagonal upward, vertical upward)

Hardness system:

Richter (HL), Brinell (HB), Rockwell B (HRB), Rockwell C (HRC), Vickers (HV), Shore (HS)

Indication error: ±0.5%(HLD=800)

Repeatability of indication: 0.8%(HLD=800)

Dimensions:148mm×30mm×30mm

Metal Leeb Hardness Tester for Alloy Tool Steel Stainless Cast Iron Metal Leeb Hardness Tester for Alloy Tool Steel Stainless Cast Iron

lLarge capacity data storage: Unprecedented mass storage leads the technology trend. 270 groups of hardness measurement data can be saved, including average value and hardness system.

Leeb with Rechargeable Lithium Battery, 170 To 960 HLDLeeb with Rechargeable Lithium Battery, 170 To 960 HLD

Leeb with Rechargeable Lithium Battery, 170 To 960 HLDLeeb with Rechargeable Lithium Battery, 170 To 960 HLD

Leeb with Rechargeable Lithium Battery, 170 To 960 HLDLeeb with Rechargeable Lithium Battery, 170 To 960 HLD

This instrument is equipped with D-type sensor, which needs to measure the hardness of metal more than 5mm. D-type probe is a conventional probe, which is suitable for measuring most workpieces. Special workpiece (such as thin workpiece, groove workpiece, etc.)

Scope of test:

(170-960)HLD

(17.9-69.5)HRC

(19-683)HB

(80-1042)HV

(30.6-102.6)HS

(13.5-101.7)HRB

Leeb hardness tester does not contain calibration blocks, you need to purchase calibration blocks locally.

Metal Leeb Hardness Tester for Alloy Tool Steel Stainless Cast Iron Metal Leeb Hardness Tester for Alloy Tool Steel Stainless Cast Iron

When the "forged steel" sample is tested with D-type impact device, Hb value can be read directly without manual check. The upper and lower limits of hardness value can be set in advance, and the alarm will be automatically out of range, which is convenient for users to test in batches.