Feature:

1. Intelligent automatic watering device, dual pump WiFi connection, mobile APP remote control, regardless of distance, you can manually or automatically water plants at any time.
2. A pump and B pump can be controlled separately, dual pump design, independent work, plant classification watering, watering more plants.
3. WiFi connection, application control, fit for IOS and for system . For details, please refer to the manual (support 2.4G frequency band, 5G frequency band WIFI is not supported temporarily)
4. Water accurately. You can freely set the watering interval, watering frequency and the amount of each watering.
5. With power‑off memory function. Don't worry about resetting your previously set data after a power failure.

Specification:

Item Type: Smart Flower Watering Device
Material: ABS+PP+Silicone
Product Size: 8.3 x 8.3 x 9.5 cm / 3.3 x 3.3 x 3.7 in

Input Voltage: AC100-240V, 50/60Hz
Output Voltage: 5V, 1A

Battery: 4PCS, AA (Not Included)

Weight: Approx. 820g / 28.9oz

Damping Material of Pump Body: Silicone
Working Temperature: 0-50℃

Adapter: DC 5V 2A DC002 3.5/1.3 (Line Length 1.2 Meters)
Maximum Water Pressure: ≥30 pai(200kpa)
: 0.3-0.8LPM
Noise: ≥65db (30cm Distance)
Pump Head: ≥2.5m/8.2ft
Pump Suction: ≥2m/6.6ft
WIFI: 2.4Ghz
APP: For eWeLink

How to use:
1. Download the Application: Search for eWebLink on the mobile phone, download and install the application.
2. Registration and Login: Users in mainland China can register with their mobile phone numbers, and users in other regions can register and log in by email. If you have already registered an e-micro account, you can enter your account to log in.
3. Connect the Device: Turn on the power of the sprinkler to keep the same WiFi signal as the mobile phone, and ensure that the WiFi is 2.4GHz. At this time, the blue signal indicator lights up, and different flashing patterns represent different states, as shown below:
2 Short and 1 Long: Pairing mode
Continuous Fast Flashing: Compatible pairing mode
Slow Flashing: Offline/Not connected
Steady Light: Networking
After the unpaired device is powered on, it is in pairing mode by default (2 short and 1 long). Press and hold any setting button for 5 seconds to switch to compatible pairing mode (continuous fast flashing); When offline (slow flashing), press and hold any setting button for 5 seconds to enter the pairing mode (2 short and 1 long).
4. Setting Parameters: When you click SET/MA, pump A will run manually; When you click SET/MB, pump B will run manually; press and hold the button for 5 seconds to switch the pairing mode.

Package List:

1 x Watering Timer

1 x Power Adapter

1 x USB Cable

20 x Water Dripper

20 x Tee Connector

1 x Hose(15 Meters)

2 x Filter

1 x Screwdriver

1 x Manual

Note:

1.The mobile phone and watering device should be as close as possible to the router in order to obtain a enhanced WiFi signal, the WiFi must be 2.4GHZ.