4L Electric Automatic Lubrication Pump, Machine Tool Lubrication Pump 220V
Fast Shipping DHL OR EMS
(This item is 220V, If you need 110V, pls let's know)
New
Introduction:
- Digital electric lubrication pump, a gear pump automatic control, working time 1-999 and rest time 1-999 seconds can be arbitrarily adjusted according to minutes of machinery and equipment, with low noise, high efficiency, simple operation, applicable in, machine tools, textile machinery, elevators, woodworking machinery gears, rail lubrication, chain lubrication, etc., with the use of centralized lubrication accessories to achieve automatic timing and quantitative effect of lubrication without manual operation.
Parameters:
- Capacity: 4.0L
- Input voltage: 220V AC
- Output Power: 25-60W
- Current: 0.35A
- Rated pressure(kgf/cm2): 15kg
- Max. pressure(kgf/cm2): 15-35kg
- Volumetric efficiency: ≥75%
- Discharge volume(cc/st): 110-140cc/min
- Oil viscosity(c.st): 30-1000c.st
Features:
- 1. Pump volume: 4.0L
- 2. Easily installation, access to 220V power supply directly.
- 3. Fitted with oil shortage warning device, controller is dual relay, with the level signal output port
- 4. The pump setting adjustment range of time, work time 1-999 seconds, intermittent time 1-999 minutes.
- 5. Standard export of pump is M10*1, Pick φ6mm tubing(if you need φ4mm, pls let us know before you order.)
- 6. This YS-2232-410X Lubrication Pump come with the functions of oil shortage warning, underpressure warning and Oil leakage warning.
Operations:
1. SET key: press this button to re-supply oil or reset to eliminate abnormal sound.
Press and hold the key for 2 seconds to set the ACT time. Press and hold the key again for 2 seconds to set the INT time, and then press the key for a long beep. The setting is completed.
2. UP/DOWN key: Modify the fuel (1-999 seconds), intermittent time (1-999 minutes) value.
3. RESET key: this key function as the "SET" button, press this button to re-supply oil or reset to eliminate abnormal sound.
4. When the lubrication pump is powered on, the system is in the state of fuel supply and enters the ACT and INT cycles. When the fuel is supplied, the ACT lamp is on and the INT lamp is on when it is off. The display time is decremented by the set value
5. "ErO" flashes to indicate insufficient fuel, "ErP" flashes to indicate abnormal pressure, and "ErS" flashes to indicate system out of operation.
What in Package:
1 x 4L Electric Lubrication Pump
NOTE:
1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.
2. Any Customs tax applied to this package should be covered by buyers.
3.As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges.These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.