Applications

For Subaru Legacy 2005-2009 (USA) BL9 BP9

For Subaru Legacy B4 2003.05-2009.04 JPN BLE BL5

For Subaru Legacy TOURING WAGON 2003.05-2009.04 JPN BP5 BPE

Specifications

Quantity: 2 pieces front + 2 pieces rear , Spanner as shown in the picture

Adjustable height: lowering 1-3 inch

Damping: non-adjustable

Top mounts: Front pillow ball top mount

Spring rate Front: 7 kg/mm (392 lbs/in)

Spring rate Rear: 12 kg/mm (672 lbs/in)

Spring length Front: 200mm

Spring length Rear: 190mm

Coilover overall length Front: 460mm-550mm

Coilover overall length Rear: 400mm-450mm

Shock Type: Twin tube

Spring Preload: 7-10 mm
 

Feature

1. Self-design structure and new manufacturing system to give more customers good coil-overs without breaking the bank.
2. Full-length height adjustable---lower your car 1-3 inches (depending on vehicle models) to get a performance ride
3. Independent Ride Height and Spring Pre-load Adjustments
4. Twin-Tube System for Comfortable Ride on Streets
5. Coated finish to avoid rust
6. Heavy Duty Steel Lower Mounts
7. Simple install,  easy to adjust.

Notice

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.