Feautres:
- [ Heat Insulation & Energy Saving ] -- Blocking out 90% of the solar rays by reflecting it away from the window, which can keep cool in summer and retain heat in winter, helping you save money by cutting the high energy bills.
- [ Daytime Privacy Protection ] -- This window tint film only provides good privacy during daytime while the exterior glass shows the mirror effect. When the inside light is stronger than outside, the mirror effect will be reversed. Remember to draw curtain during night.
- [ Effective UV Blocking ] -- This uv window film can block out 90% harmful rays that may hurt your skin, prevent your precious furniture and interior decorations from fading.
- [ Static Cling & Easy to Install ] -- This self adhesive window privacy film is free of glue design, very easy to install and remove, just make sure the glass surface is completely clean and smooth. Remember to spray A LOT of soap water to both the adhesive side and window.
Specifications
Size: 50cm*1/2/3/4/5m
100cm*1/2/3/4/5m
Darkness: 5% / 15% / 20% VLT
Installation location: front and rear windshield, car window, sunroof, etc.
Suitable models: general-purpose
Product function: strong heat insulation, block ultraviolet rays, protect privacy, protect car windows
Sun block effect,uv protection,heat protection,keep your car cooler,help save energy costs
It also gives our films a stylish look with outstanding color stability, and provides high heat rejection with no signal interference
UV-proof Blocking 99% of the UV, care of your skin.
Scratch resistant 99% , 65% Heat Regjection
Lasts 5-7 years on the outside of your vehicle without fading, cracking or peeling.
Characteristic:
1. Super heat insulation, driving during the day and night, the vision is still clear
2. Protect the car windows and prevent damage to the glass surface
FITTING INSTRUCTIONS:
1. Measure the size of the car glass, the length and width of each plus more than 3 cm, so as not to install the glass is not standard film leakage¡
2. A clean window is vital a successful installation,so keep Window or Glass clean.
3. Remove the clear backing sheet from Film .Use your spray bottle to cover the entire surface of the film with soapy water.This helps to prevent the film becoming tangled and sticking to itself.
4. Pick up your film and apply to your window( Please MAKE SURE you have removed it before you apply the window film to glass).The soapy water solution on the film and the glass will allow you to slide it into correct position.
5. And repeat the squeegee process,using the squeegee to push any remaining moisture or bubbles to the edge of the window.Much easier than Wall Decals, it's no problem for you!Step 6. Finally use the paper towels to dry the window and the frame,being carefully not to lift the film at the edges or corners.Enjoy your works!
Packing included：
car window film*1
Method:
1) Thoroughly clean the window the film will be applied to.
2) Cut your film to size of the window, adding an extra 2cm to the width and height.
3) Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the soapy water solution. (Tip: If you cannot remove the clear lining film, attach a piece of sticky tape to either side of the film at one corner and peel away from each other).
4) Spray the glass with the soapy water
5) Apply the adhesive side of the film onto the glass and slide into position
6) Spray the face of the film with the soapy water and using a squeegee or credit card wrapped in paper towel, squeegee out all the soapy water from behind the film
7) Trim off any excess film using a sharp knife for a neat finish
DAYTIME PRIVACY PROTECTION
The one way window film provides great intended privacy ONLY during daytime. The side with brighter light would show a mirror-like appearance. So the mirror-effect would be reversed at night since the inside will be brighter than the outside, which means people would be able to SEE THROUGH the window. Remember to draw a curtain during night.
