Spezifikationen:
L Modell: Standard (Automatische Abschaltung)
L Unabhängiger Expansionsgaskondensator
L Mit Öl-wasser-abscheider
L Leistung: 1800 W.
L Geschwindigkeit: 2800 U / Min
L Druck: 0-30 Mpa
L Rauschen: 76 Db
L Verdrängung: 80 L / Min
L Komprimierte Serie: Die Sekundäre Komprimierung
L Saugdruck: Atmosphärendruck
L Kühlweg: Wassergekühlt
L Schmierweise: Spritzschmierung
L Sicherheitseinstellungen: Niederdruck- / Hochdruck-überdruckventil
L Werksdruck: 32mpa
L Sicherheit: Gasüberdruckschutz Sicherheitsventil Motorüberlastschutz (Voreingestelltes 32mpa Automatisches Startauslass-sicherheitsventil)
L Geeignet Für: Alle Größen Von Hochdruckgasflaschen, Rohrventilen, Hochdruckrohren Innerhalb Von 6,8 L, Für Den Langzeitgebrauch Geeignet, Gute Kühlwirkung, Bequeme Wartung
Eigenschaften:
L Kupferdrahtmotor, Lange Lebensdauer
L Ganzkern Aus Metall, Langlebig
L Optimiertes Design Der Expansionskompensationsring-atemwege, Schnelle Luftversorgung
L Eingebaute Kühlkörperstruktur Wasserkühlung, Schnelle Wärmeableitung
L Rost- Und Korrosionsschutzbehandlung Des Hochdruckzylinderkopfes. Kein Potenzielles Sicherheitsrisiko Durch Oxidation.
L Wärmestrahlungsschutz Des Hochdruckzylinders. Reduzieren Sie Die Überhitzung Des Hochdruckzylinderkerns, Was Zu Übermäßigem Kolbenverschleiß Führt
L Druckexplosionsgeschütztes Ventil. Wenn Der Druck 32 Mpa Erreicht, Startet Die Druckversicherung Automatisch.
L Angemessene Kollokation, Umwälzwasserkühlung Des Hochdruckzylinders, Motor-zwangsluftkühlsystem.
L Das Produkt Wird Streng Kontrolliert Und Nach Dem Testen Geliefert. Wenn Die Maschine Eine Leichte Ölleckage Aufweist, Ist Dies Ein Normales Phänomen. Einige Produkte Werden Nach Dem Testen Nicht Gereinigt.
Packliste:
L 1 X Luftkompressor
L 1 X Wasserpumpe
L 1 X Wasserschlauch
L 1 X Öl-wasser-trennung
L 1 X Gefährdete Teile Einstellen
Hinweis:
Bitte Lesen Sie Diese Sorgfältig Durch, Bevor Sie Die Luftpumpe Verwenden
L Überprüfen Sie, Ob Sich Das Öl an Der Obergrenze Befindet.
L Ersetzen Sie Das Entlüftungsventil.
L Schließen Sie Die Wasserpumpe an Und Überprüfen Sie Die Wasserzirkulation, Bevor Sie Beginnen.
L Die Wassertemperatur (450 ° - 650 °) Ist Die Am Besten Geeignete Temperatur. (Bitte 1-2 Minuten Lang Ablassen Und Abschalten, Wenn Es 700 ° Überschreitet)
L Verwenden Sie Ein Netzteil Mit Mehr Als 220 V / 16 a.
L Nach Dem Aufpumpen Zuerst Ablassen Und Dann Abschalten.
===========================================================
Specifications:
L Model: Standard(Automatic Shut-down)
L Independent Expansion Gas Condenser
L with Oil-water Separator
L Power: 1800 W
L Speed: 2800r/Min
L Pressure: 0-30mpa
L Noise: 76db
L Displacement: 80l/Min
L Compressed Series:the Secondary Compression
L Suction Pressure:atmospheric Pressure
L Cooling Way:water Cooled
L Lubrication Way:splash Lubrication
L Security Settings:low Pressure/High Pressure Relief Valve
L Factory Blast Pressure:32mpa
L Safety: Gas Over-pressure Protection Safety Valve Motor Overload Protector (Preset 32mpa Automatic Start Exhaust Safety Valve)
L Suitable for: All Sizes of High-pressure Gas Cylinders, Pipe Valves, High-pressure Pipes Within 6.8l, Suitable for Long-term Use, Good Cooling Effect, Convenient Maintenance
Features:
L Copper Wire Motor, Long Service Life
L All Metal Inner Core, Durable
L Optimized Design of Expansion Compensation Ring Airway, Fast Air Supply
L Built in Heat Sink Structure Water Cooling, Fast Heat Dissipation
L Anti Rust and Anti-corrosion Treatment of High Pressure Cylinder Head. No Potential Safety Hazard Due to Oxidation.
L High Pressure Cylinder Heat Radiation Protection. Reduce Overheating of High Pressure Cylinder Core, Resulting in Excessive Piston Wear
L Pressure Explosion-proof Valve. When the Pressure Reaches 32mpa, the Pressure Insurance Will Automatically Start.
L Reasonable Collocation, High Pressure Cylinder Circulating Water Cooling, Motor Forced Air Cooling System.
L the Product Is Strictly Controlled and Delivered After Testing. If the Machine Has Slight Oil Leakage, It Is a Normal Phenomenon. some Products Are Not Cleaned After Testing.
Packing List:
L 1 XAir Compressor
L 1 X Water Pump
L 1 X Water Tube
L 1 X Oil Water Separation
L 1 X Set Vulnerable Parts
Note:
Please Read Carefully Before Using the Air Pump
L Check That the Oil Is at the Upper Limit.
L Replace the Vent Valve.
L Connect the Water Pump and Confirm the Water Circulation Before Starting.
L Water Temperature (450 ° - 650 °) Is the Most Suitable Temperature. (Please Exhaust and Shut down for 1-2 Minutes If It Exceeds 700 °)
L Use a Power Supply of More than 220v / 16a.
L After the Inflation Is Completed, Exhaust First and Then Shut down.
Marke | Markenlos |
---|---|
Herstellernummer | nicht zutreffend |
Shipping excludes | Canarias ( 加那利群岛 ) |
EAN | Does not apply |
UPC | Does not apply |
ISBN | Does not apply |