Product description:

brand new and high quality
Made of high-quality materials,
The DRV8825 stepper motor driver carrier is the breakout board for TI's DRV8825 microstepping bipolar stepper motor driver.
This module has almost the same pins and interfaces as our A4988 stepper motor driver carrier, so it can be used as a higher performance direct replacement for these boards in many applications
DRV8825 has adjustable current limit, overcurrent and overheat protection, and six microstep resolutions (down to 1/32 step)
Its operating voltage is 8.2 – 45 V, and each phase can provide up to approximately 1.5 A of current without the need for a radiator or forced air (the rated current of each coil is up to 2.2 A, and there is sufficient additional cooling)
Simple step and direction control interface
Six different step resolutions: full step, half step, 1/4 step, 1/8 step, 1/16 step and 1/32 step
Can directly interface with 3.3V and 5V s
Over-temperature thermal shutdown, over-current shutdown and under-voltage lofor CKout
Short-to-ground and load short-circuit protection
4-layer 2 oz copper PCB for improved heat dissipation
Exposed solderable ground pad under the driver IC on the bottom of the PCB
The module size, pinout and interface match our A4988 stepper motor driver carrier in most aspects
Adjustable current control allows you to use the potentiometer to set the maximum current output, allowing you to use a voltage higher than the rated voltage of the stepper motor to achieve a higher step rate
Intelligent chopper control, automatically select the correct current attenuation mode (fast decay or slow decay)
45 V maximum supply voltage
Built-in voltage regulator (no need for external logic voltage supply)


Package list:

5 *DRV8825 stepper motor driver
5 *Radiator

Note:

1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.