CROSSOVER-RX Ma-RX42-S(FUTABA-SFHSS) Built-in ESC/5CH MicroRX
MA-RX42-D series of receivers are upgraded from the old version(2016), smaller and more stable with additional TELEM function. It still provides 4 independent output ports and 1 integrated 5A/1S brush ESC.
Features
1)Modulation:Compatible FUTABA-SFHSS
2)Small size: 18.5*12.0*6.5mm(not including antenna)
3)Super light: 0.9g(including antenna)
4)Working voltage:3.0~5.0V
5)With built-in 5A/1S brush ESC (Lock starting function)
6)Support connecting outside brush ESC or brushless ESC
7)Binding automatically
Note: not support PPM output anymore!
Basic version
1)Type:Ma-RX42-D
2)Protocol:FUTABA-SFHSS
3)TELEM function:No
Connection Diagram
Auto binding
As
it is difficult to reach the binding button when the receiver has been
installed inside the plane, we developed self-binding function,
it
works like this: The receiver will enter binding mode automatically
after powered and no signal for 15 seconds (slow flashing LED light
turns to fast
flashing), then complete the binding operation according to your transmitter binding manual.
Start-Lock Function
Start-Lock
Function is the onboard brush ESC function of preventing brush motor
from starting by mistake. It can protect the brush motor from starting
even throttle stick not at the lowest position when the receiver is powered.
As
soon as the receiver gets the signal and the throttle stick on your
transmitter is at the lowest position for 2 seconds the first time,
Start-Lock will
be released then, the brush motor will run when the throttle stick is pushed.
TELEM function
TELEM
function is useful on monitoring battery voltage, receiver working
voltage and its signal strength as well as its working temperature in
real time,
through
which customer can get working state of receiver and battery
discharging state under control, so flying out of control range and over
discharging
will
rarely happen ( for brushless motor rotation speed or flight height
monitoring, customer needs to choose a more advanced receiver)
NOTE:
The effective control range of TELEM function depends on transmitter,
it is possible that this would happen: the working range of the receiver
is far
more than TELEM function effective range, it is normal and alright!
MA-RX42-X series receivers have the following 8 versions
