Feature:
1. LCD TOUCH SCREEN: The transceiver is equipped with a 3.2in LCD touch screen with resistive touch panel, 4 way buttons, jog wheel and select buttons.
2. EXCELLENT PERFORMANCE: The transceiver features SSB, AM, narrowband FM, wideband FM audio reception, as well as cascaded spectrum, wideband (18MHz) spectrum and cascaded analysis.
3. HIGH SENSITIVITY: The user can calibrate the PPM for a more accurate adjustment, resulting in a more accurate radio transceiver with less error.
4. ENERGY SAVING: In sleep mode, the radio transceiver saves energy by simply turning off the display for longer standby time.
5. WIDE APPLICATION: This transceiver can be used in ship automatic identification system, tire pressure detection system, identity authentication, anti jamming, etc.
Specification:
Item Type: Portable Radio Transceiver
Material: ABS
Transmit Power: 5-15dBm(10MHz-2150MHz), 13-15dBm(2150-2750MHz), 0-5dBm(2750-4000MHz), -10-0dBm(4000-6000MHz)
RF Bandwidth: 20MHz
Sampling Rate: 2Msps-20Msps
Power Supply Transmission Interface: USB2.0 (external power supply)
Received Power: -5dBm
Clock Accuracy: 0.1-0.5pp
Working Frequency Band: 1MHz-6GHz
Duplex Mode: Half duplex transceiver
Main Chip:
Processor: LPC43xxARM Cortex M4
Complex Programmable Logic Device: CPLD CoolRunner II
Wireless RF Transceiver: MAX2837(2.3-2.7GHztransceiver)
Mixer RFFC5072 (30MHz-6GHz)
Application: Radio communication technology research, information security technology research, for ZigBee, WiFi, for LTE, for ADS B, for DVB, etc.
Wireless Communication Physical Layer Security : Key generation, identity authentication, anti interference, source, channel codec, modulation and demodulation, source mechanism based on RSSI wireless application system and CSI. Channel encoding and decoding, modulation and demodulation spread spectrum, channel simulation.
After H2 PLUS Update:
1. LCD display power, cancel LED display power, and further optimize the power consumption when the battery is powered;
2. Built in microphone, external microphone, switch,
3. Automatic switching between built in speakers and external speakers. When no external speakers are connected, the built in speakers play sound. When connecting an external speaker, the built-in speaker automatically switches to the external speaker to play sound
4. The knob is changed to use a 360 degree rotation knob:
Turn the red toggle switch on the right to the "on" position, and press the middle button of the knob to enter the function interface.
Add it to your software defined radio and leave your laptop behind! Added LCD touch screen, navigation controls, headphone jack, real time clock, micro storage card (excluded) slot.
Just add a USB battery and explore the radio spectrum anywhere, anytime. This firmware is for your fast ARM processor. No computer required (except firmware reprogramming)
Package List:
1 x Portable Radio Transceiver
1 x Antenna
1 x Data Cable
1 x Storage Bag
Note:
1. When you get our device, you can use it directly, no need to upgrade, no need to insert the storage card (excluded), don't press the reset button, otherwise it will be a black screen
2. The firmware cannot be updated at will, if it is not the firmware provided by us, the product will be burned
