RD-50 Hot melt Binding Machine
Hot melt adhesive machine does not need to punch, using the principle of resin hot melt glue in a few seconds to loose papers binding into a strong and beautiful books, has simple operation, high speed, low material cost advantages, applicable to small and medium-sized units, hot melt adhesive machine is widely used in graphic store, school, office, the binding of Wen Yinshe or conference documents.
Product parts
1-Cooling tank 2-Parameters Table 3-Clamping handle 4-Automatic clamping 5-Binding slot 6-Operation diagram 7-Non-slip foot pads 8-Three level temperature adjustment 9-Front switch 10-Power switch
Product Parameter
|
Model Number
|
RD-50
|
|
Applicable consumables
|
Hot-melt envelope, hot-melt adhesive tape
|
|
Applicable Cover Thickness
|
50-350G
|
|
power
|
100W
|
|
Machine Size
|
380*230*180MM
|
|
Packing Size
|
420*110*280MM
|
|
N./G.W.
|
4.1KG/4.4KG
|
|
Binding width
|
320*50MM
|
|
Binding time of three gears
|
1st gear:60s , 2nd gear:120s , 3rd gear:210s , Suitable for different thickness cover
|
|
Characteristic
|
50MM Binding Thickness, Three Binding Methods, Three Binding Times Adjustment, PTC Heating Speed, With Automatic Clamping
Function, Easy and Fast Operation |
Product advantage
Hot melt adhesive machine
No need to punch 50MM binding thickness
Metal Material
Inner and outer metal structure
Three periods of temperature control
Suitable for different thickness binding
CPU control
Delay protection Solve glue overflow
PTC ceramic heating
Faster heating
Dual gear drive
Safe, stable and durable
Infrared detection
Full intelligence
50MM binding thickness
Fast binding and high efficiency
No need to punch 50MM binding thickness
Metal Material
Inner and outer metal structure
Three periods of temperature control
Suitable for different thickness binding
CPU control
Delay protection Solve glue overflow
PTC ceramic heating
Faster heating
Dual gear drive
Safe, stable and durable
Infrared detection
Full intelligence
50MM binding thickness
Fast binding and high efficiency
Product details
Metal structure.Automatic clamping iron plate is removable
The machine is made by metal.The structure is stable and durable.The steel plate make the binding well.
microcomputer chip control
The machine will turn off if it stop working in 30 min.The machine will stop heating if the file still in the machine in 10 mins.The system will make the machine working safe.
Gear Rack and Torsion Spring Design
Gear Rack and Torsion Spring Design.
50MM binding thickness
PTC heating, preheating for 3 minutes, binding for one minute, heating and preheating fast, short cooling time, sustainable work,
safety, energy saving.
safety, energy saving.
Switch button
Left switch button is suitable for the public.
Cooling slot and Heat vent
Ventilation cooling trough, after the completion of the booklet cooling, rear radiator, uniform heat dissipation.
