24V 50A丨1200W Power Supply Adapter SMPS AC 110/220V to DC 24Volt Universal Regulated Switching Transformer Converter PSU for LED Strips 3D Printer CCTV Camera Speaker Motor Pump,and More.                                                            Features & details

• 【AC TO DC CONVERTER 24V 50A POWER SUPPLY】-Input: AC 110/220V 50 / 60Hz; Output: Default DC 24V,Adjustable range: ±10%,form 21.6V-26.4V, which greatly expand its application range. Maximum 50A 1200watt power.Please select a power supply at least 20% larger than your device's rated power,good for safety.Three sets of output channels available,it can power more devices. Net weight: 2.42 lbs. Dimension: 24.5*12.5*6.5cm/9.64 X 4.92 X 2.56 inch

• 【Good Heat Dissipation】-This AC to DC universal power supply transformer 110V to 60V is made of metal material with many holes,which makes heat dissipation more effictive and ensures stability.Built-in cooling fan to prevent the device from overheating,when the working temperature is more than 122℉(45℃), the intelligent thermal protection will active the cooling fan with little noise to lower the temperature. 🔺Non-waterproof, In-Door Use Only!

• 【Switchable Dual Input Voltage Converter】-There is a voltage switch located on the side of the convetert,our factory setting for US customers is 110V.If you want to use AC 220V,please don't forget to adjust the switch to the 230V(220V) side before use to avoid damaging.AC 110V/220V is just according to your local voltage.

• 【SAFETY PERFORMANCE】-100% full load burn-in tested,guaranteed security. With smart chips provide automatic overload cut-off / over Voltage cut-off / automatic thermal cut-off / short circuit protection.protect your electronic products from destruction.There is no voltage fluctuations at power on, during transmit, receive, or at power off.Built-in EMI filter, low output ripple.

• 【HOW TO CHOOSE？】This unit convert AC mains power to DC 24Volt,peak power is 50A 1200watts, work perfectly with most 24V devices under 1200W, such as LED strips light,3D printer, diesel heater,ham radio,etc. It will automatically outputs 0~50A current to match your device, the actual current is depended on the load,such as 10A(240W), 20A(480W), 30A(720W),40A(960W)....Make sure your device match the 24V voltage and current less than 50Amper.Please DON'T run it overload.