eBay

Feature:

1. 4u active CPU cooler for X9 slot R R 4U cooler LGA2011 square and narrow ILM for 3800 RPM.
2. Support for processor E5‑1600/E5‑1600 v2/E5‑1600 v3 series.
3. Support for processor E5‑2600/E5‑2600 v2/E5‑2600 v3 /E5‑2600 v4 series.
4. Can effectively reduce temperature generated by the CPU during and prolong the service life of computer.
5. The fan rated speed is 3800RPM, low noise, stable and reliable performance.

Specification:

Item Type: CPU Cooler Fan

Model: SNK-P0050AP4
Type:
ILM Type: square, narrow

CPU Size: Approx. 105 x 93 x 126mm / 4.1 x 3.7 x 5in

Application: 4U X9 UP server
Socket Type: LGA 2011
Supported CPU: For processor E5-1600/E5-1600 v2/E5-1600 v3 series, For processor E5-2600/E5-2600 v2/E5-2600 v3 /E5-2600 v4 series
Supported CPU T: Up to 165 watts
Cooling Fan:
Speed Control: 4Pin PWM
Rated Voltage: 12.0 VDC
Rated Speed: 3,800 RPM
Noise: 38.0 dB (A) at rated speed

Cooling Fan Size: Approx. 92 x 92 x 25mm / 3.6 x 3.6 x 1in

Location: Front

How To Use:
1. Take out SNK-P0050AP4 from the package. SNK. poo50AP4 supports for Socket LGA2011 (SocketR) square and narrow independent loading mechanism (ILM). Before installing the heat sink, please check which ILM is equipped on the motherboard.
2. By default, the square ILM mounting bracket is fixed on the bottom of the . If the motherboard is equipped with a narrow ILM, follow the instructions in Figure 1 to replace the default square ILM mounting bracket with a narrow ILM mounting bracket.
3. Remove the protective cover of the thermal interface material (TIM). The required amount has been pre-applied on the bottom of the heat sink. Check the pre-coated TIM for damage.
4. Place the heat sink directly on the top of the CPU so that the four heat sink mounting screws are aligned with the four heat sink mounting studs on the lLM and fixed on them. The must be correctly aligned with the flowing direction of the system cooling air. Please note that when tightening the four mounting screws, do not install the cooling fan on the body.
5. Use a screwdriver with #2 screw head and adjust the torsion setting of the screwdriver to 5.0 kgf-cm (4.3lbf-in). Before opening the screwdriver, make sure that the screwdriver bit is fully inserted into the groove on the heat sink mounting screw head. During the installation process, keep the heat sink mounting screws vertical.
6. Tighten the two diagonal mounting screws until they are just right. Do not tighten completely! Then, do the same with the remaining two diagonal heat sink mounting screws.
7. Follow the installation pattern on all four heat sink mounting screws to ensure that the bottom of the heat sink is properly installed on the CPU and prevent the heat sink from tilting. Fully tighten all four heat sink mounting screws to complete the installation.
8. Install the cooling fan and bracket assembly to the body, and then tighten the single locking screw on the top of the fan bracket
9. Connect the SNK-PO050AP4 cooling fan connector to the fan header marked CPU on the motherboard.

Package List:

1 x Cooling Base

1 x Cooling Fan

1 x Bracket

1 x User Manual

1 x Screw

We accept .
We ship item to your verified address.
Payment must be received within 3 days from the date of purchase.

All the items will be dispatched within one business day by Airmail after the payment is clear.

Most times you will receive your order within 10-30 business days after we transfer your package to the delivery company. We cannot guarantee the delivery timeframe if the post office has any unexpected delays due to holiday, weather, customs, or other conditions. Some countries like Russia, Brazil, or some European countries may take up to 50 days or longer for delivery.

We appreciate your patience if you haven't received items in 30 days(Russian customers may need more patience by reason of the local delivery system and/or customs). If you are concerned in any way, please feel free to contact us via ebay message instead of leaving negative/neutral feedback or opening a dispute. We will do our best to solve any problem(resend or refund any missing item).

Customs duty is obligation and liability of citizens in your country, so buyer should be responsible for any tax and custom duty incurred. Generally, the delay or failure delivery is sometimes caused by the policy of different customs.

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.ziopt.com/upload/third_resource/image/shipc73.jpg

On Jul 5, 2024 at 13:54:33 PDT, seller added the following information: