Features:
The wireless remote control switch adopts Radio Frequency Identification technology, which is mainly used for remote wireless home appliance control.
Selectable working modes - Jog / Self-locking / Interlock.
It can control one or more devices in the room, and the performance is stable and reliable.
Easy to use.
Remote control distance: 100 meters in open area.

Specification:
Type: 12V Wireless Remote control switch single controller
Weight: about 57g (controller + remote control)
Size: about 3.9x3.6x2.5cm
Type: Single One-way remote control switch
Working voltage: 12V
Working frequency: 433MHZ
Total load power: 10A
Remote control distance: 100M
Working temperature: -15-75℃
 
Package list:
1 * Remote Control
1 * Switch

Note:
1. Please allow slight error due to manual measurement.
2. Different monitor colors may be different. Thanks for your kind understanding.

Output Mode:
1. Self-locking: Press the same remote control button, press once, the relay is on, press again, the relay is off.
2. Interlock: Press the "A" button on the remote control, the relay will open, press the "B" button on the remote control, and the relay will be off.
3. Jog: Press the "A" button on the remote control, the relay will open, release the "A" button on the remote control, and the relay will be off. If you keep pressing the "A" button, the remote control is always on. When will it be released then when the relay is off.

Remote Control:
1. Clear code: Press and hold the learning button, the indicator light is on. After about 8 seconds, the indicator light flashes 3 times and then off, indicating that the clearing is successful. The remote controllers that were paired before being erased are all deleted.
2. Working mode selection: The switching mode of this switch is changed by using the jumper cap. The jumper cap is not inserted into the jog mode, inserted in the middle of the T is self-locking, inserted in the L and the middle is interlocked.
3. Learn to match the remote control: Press the learning button, the indicator light is on, then press the remote control button to be matched, the indicator light flashes 3 times and then the corresponding remote control is successfully paired.
If there's multiple remote controls, just repeat step 3 without clearing the code.


  



 

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

 

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. 

https://image-us.chengykj.com/upload/third_resource/image/feedback.jpg


We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. 

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg

DataCaciques