This is a multi-function 48V inverter charger, combining functions of inverter, MPPT solar charger, and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easily accessible button operations such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.

NOTE 1: This is a wide voltage Hybrid inverter. Solar panel input voltage must be higher than 150V so that can start up the inverter to work.

NOTE 2: This Hybrid Inverter supports the WIFI function, but need to buy the WIFI module connected to the APP so that can monitor it.

NOTE 3:For 110/120V US home appliances Devices, you can simply add a Transformer (not includes) which stepping down 220/240V AC power to 110/120V AC Power, then your 110V home appliances is also ok to use at the same time, this inverter can't output 110V power, this is a Single-phase 220V output inverter.

Features

• • 【New Upgrade Hybrid Inverter】6.2KW Solar Hybrid Inverter Output Voltage Regulation: 230Vac±5%, Max Input Power: 6200W; Max PV Array Open Circuit Voltage: 500VDC, PV Array MPPT Voltage Range: 120VDC~450VDC, Max AC Input Voltage: 300Vac, Input Current: 18A.
  • 【Multiple Battery Options】6200W Solar Inverter 48V DC to 220-230V AC, Built in 100A MPPT Charge Controller. New Upgrade Pure sine wave inverter, for 48V Lead-Acid(Seal, AGM, Gel, Flooded)/Lithium battery and can run without battery.
  • 【Four Safe Charging Modes】48V Inverter supports 4 charging modes: solar/utility priority/solar priority/utility hybrid charging. Three output modes can be set. PV priority/Utility priority/Inverter priority, which can meet users’ different application needs.
  • 【Complete Protections】PowMr inverter has Overload/Over temperature/Short circuit protection. Smart design for optimizing battery performance. An intelligent variable speed fan efficiently dissipates heat and extends system life. Compatible with mains voltage or generator power, Automatic restart when AC power is restored.
  • 【Parallel Function】This Off-Grid inverter Support parallel function, and can parallel up to 12 inverters in parallel!!!!!  Which means it can handle max 5500W*12 solar power and 5500W*12 ac power output system. When In split phase operation with three phases, AC output can be 380V.

Specification:

Line Mode Specifications
INVERTER MODEL	POW-HVM6.2K-48V-LIP (Parallel 12 unit)
Input Voltage Waveform	Sinusoidal (utility or generator)
Nominal Input Voltage	230Vac
Low Loss Voltage	170Vac±7V (UPS) 90Vac±7V (Appliances)
Low Loss Return Voltage	180Vac±7V (UPS);
	100Vac±7V (Appliances)
High Loss Voltage	280Vac±7V
High Loss Return Voltage	270Vac±7V
Max AC Input Voltage	300Vac
Nominal Input Frequency	50Hz / 60Hz (Auto detection)
Low Loss Frequency	40±1Hz
Low Loss Return Frequency	42±1Hz
High Loss Frequency	65±1Hz
High Loss Return Frequency	63±1Hz
Output Short Circuit Protection	Line mode: Circuit Breaker Battery mode: Electronic Circuits
Efficiency (Line Mode)	>95% ( Rated R load, battery full charged )
Transfer Time	10ms typical (UPS); 20ms typical (Appliances)
Inverter Mode Specifications
INVERTER MODEL	6.2KVA
Rated Output Power	6.2KVA/6.2KW
Output Voltage Waveform	Pure Sine Wave
Output Voltage Regulation	230Vac±5%
Output Frequency	60Hz or 50Hz
Peak Efficiency	94%
Overload Protection	5s@>140% load; 10s@100%~140% load
Surge Capacity
Nominal DC Input Voltage	48Vdc
Cold Start Voltage	46.0Vdc
Low DC Warning Voltage
@ load < 20%	44.0Vdc
@ 20% < load < 50%	42.8Vdc
@ load > 50%	40.4Vdc
Low DC Warning Return Voltage
@ load < 20%	46.0Vdc
@ 20% < load < 50%	44.8Vdc
@ load > 50%	42.4Vdc
Low DC Cut-off Voltage
@ load < 20%	42.0Vdc
@ 20% < load < 50%	40.8Vdc
@ load > 50%	38.4Vdc
Charge Mode Specifications
Utility Charging Mode
INVERTER MODEL	6.2KVA
AC Charging Current (Max)	100Amp  (@ VI/P=230Vac)
Bulk Charging Voltage
Flooded Battery	58.4Vdc
AGM / Gel Battery	56.4Vdc
Floating Charging Voltage	54Vdc
Overcharge Protection	63Vdc
Charging Algorithm
Solar Input
INVERTER MODEL	6.2KVA
Rated Power	6200W
Max. PV Array Open Circuit Voltage	500VDC
PV Array MPPT Voltage Range	120-450VDC
Max. Input Current	18A
General Specifications
INVERTER MODEL	5.5KVA
Safety Certification	CE
Operating Temperature Range	-10°C to 55°C
Storage temperature	-15°C to 60°C
Humidity	5% to 95% Relative Humidity (Non-condensing)
Dimension (D*W*H), mm	448x295x105
Net Weight, kg	12.5

 

 

 

Multiple inverters in parallel:

This inverter has a parallel function, which can be Two inverters in parallel; Three inverters in parallel; Four inverters in parallel; Five inverters in parallel; Six inverters in parallel; or Seven inverters in parallel.... Up to 12 inverters can be paralleled

 

NOTE:

For parallel model installation and operation, please check the parallel installation guide for the details.

Support 3-phase equipment

 

 

Inverter parallel &two different operation modes

1. Parallel operation in a single phase with up to 9 units. The supported maximum output power is 45KW/45KVA.
2. A maximum of 9 units work together to support three-phase equipment. Seven units support one phase maximum. 

NOTE:

• If this unit is bundled with a shared current cable and parallel cable, this inverter is default supported parallel operation.
• Do not connect the current sharing cable between the inverters which are in different phases. Otherwise, it may damage the inverters.