Your requirements
- Klüberpaste HEL 46-450 is a black hot screw paste for high-alloy
steels. It contains fully synthetic polyalkylene glycol and ester base
oils and a combination of inorganic solid lubricants.
Klüberpaste HEL 46-450 is suitable for a temperature range
between -40 °C and 1000 °C. In the normal temperature range (i.e.
below 200 °C) it shows good anticorrosion behavior and good
water resistance. Above 200 °C it acts as a dry lubricant.
Application
Screw paste for conventional and high-alloy steels (Cr-Ni steels) up
to 1000 °C.
Lubricating and assembly paste for connections in hot air ducts (e.g.
automotive exhaust systems). For connecting elements in
turbochargers and compressors.
Application notes
It is important to clean and degrease the contact surfaces thoroughly
before applying Klüberpaste HEL 46-450.
A thin layer of paste is then applied with a brush, leather cloth, or plastic
sponge.
Klüberpaste HEL 46-450 spreads easily over the entire surface and
thus prevents excess lubrication.
Close the container immediately after use to prevent
contamination.
The friction values indicated on page 2 in the Section Product Data
were determined with two different materials. Other
materials/surfaces have to be checked accordingly.