Bluetooth EKG 24 hour real-time ECG monitoring ultra-thin ECG patch Portable recorder Wearable wireless personal ECG monitor
Description
How it works:
One of the main manifestations of cardiac activity is electrical stimulation. The activity of cardiomyocytes is a kind of electrical signal conduction, and the integrated heart movement is also a kind of electrical activity, which can transmit electrical signals to the body surface through tissues and body fluids, and use the professional sensors placed on the body surface to connect to the four devices. The electrodes can thus trace the electrical activity of the heart as a regular or irregular pattern called an electrocardiogram. According to the different rhythm periods and times of the heartbeat, as well as the location of the markers on the body surface, the electrocardiogram of the same cardiac cycle may appear slightly different in different leads.
How to use heart rate stickers:：
start up
1) Before using the heart rate sticker for the first time, please charge it with the charging box. The blue light on the center rate sticker is always on during charging, the green light is always on when it is fully charged, and the green light on the charging box is always on. When the external USB is charging the charging box, the orange light of the charging box flashes, and the green light is always on when fully charged.
2) Press and hold the power button for 2 seconds, the heart rate sticker will turn on, and the blue light will be on after booting. When the heart rate sticker is in standby mode, the blue light will be on and it will automatically shut down within 3 minutes
Install the electrodes
1) Peel off the release paper marked "1" on the front of the electrode sheet
2) Stick the heart rate sticker to the middle of the electrode pad and press it tightly
3) Peel off the release paper marked "2" on the back of the electrode sheet
4) Stick the electrode sheet to one of the positions shown in the figure
5) Peel off the release paper on the front edge of the electrode sheet
Product Specifications:
Product Name: Smart ECG Recorder
Product model: ER1
Appearance size of the heart rate sticker: 89*35*8mm, about 1/4 the size of a smartphone
Appearance size of the charging box: 145*60*30mm, about the size of an adult's palm
Packing box size: 173*108*65mm
Use suggestions:
Status of the indicator light: the blue light is always on, the heart rate sticker is turned on and is waiting for the lead state
After the lead is successful, the blue light flashes at intervals of 1 second, and stops flashing after 1 minute
The lead is not successful, the blue light is always on and the state is waiting for the lead
The heart rate is low, and the yellow light is always on for 30 seconds, then it will automatically shut down
When the charging box is charging the heart rate sticker, the green light of the charging box is always on. The blue light is always on when the heart rate sticker is charging, and the green light is always on when the heart rate sticker is fully charged
When the adapter is charging the charging box, the orange light of the charging box is flashing, the green light is always on when fully charged, the charging indicator light of the heart rate sticker remains unchanged, and the yellow light of the charging box is always on for 30 seconds, and then the indicator light is off
When the Bluetooth is not connected, there is no indicator light, and the APP shows that it has been disconnected. The bluetooth connection is normal, no indicator light shows that the APP shows that it is connected
Product parameters:
Heart rate range: heart rate measurement range; 30bpm ~ 300bpm; the error should be ±2% or ±2bpm, whichever is greater
Standard sensitivity: 10mm/mV, error ≤ ±10%;
Power-on function: single button, long press for 2 seconds to turn on, the blue indicator light is always on, and the heart rate sticker turns on
Working life: heart rate sticker power consumption is less than 15uA, power: about 5mW, continuous detection of ECG> 36 hours
Power supply mode: Heart rate sticker built-in 70mA (401220 specification) rechargeable polymer battery
Charging method: dedicated safe charging base, built-in 1500mA (454070) rechargeable polymer battery, 5VA adapter, Type-c public interface, equipped with charging cable
Charging time: the heart rate patch is fully charged for about 1-1.5 hours
Wireless Bluetooth: Bluetooth 4.2 Low Energy (BLE) protocol
Data transmission: the measurement data can be transmitted to the terminal device in real time via bluetooth
Mobile APP operating system: Android 5.0 and above
Type of protection against electric shock of the applied part: Type CF
Product assembly: the shell is made of ABS raw materials, the whole machine consists of heart rate stickers + charging box + electrode sheet + manual + packing box + charging line
Q&A:
Q: How often is the data recorded?
Answer: The detection data is recorded in real time, and the recording time is at least 1 month.
Question: When the ECG is detected, the waveform is very chaotic, sometimes there is no?
Answer: It may be that the signal acquisition is not good. It is recommended to wash the pasted parts of the body before use. It is recommended to wash with soap and water and dry with dry gauze
It may be that the signal acquisition is not good, the test position can be replaced or the lead method is wrong. There are many hairs on the sticking part, you can remove the hair or change the position
Q: Does it support people who have a pacemaker in their body?
Answer: No, people who install pacemakers should listen to the guidance of specialist doctors and use more professional ECG measuring instruments
Q: How to turn off the heart rate sticker
A: It will automatically shut down after 3 minutes without connection. Put it in the charging box to charge, and it will automatically shut down after taking out the heart rate sticker.
Q: Is the device waterproof? Can it be worn while bathing?
Answer: It is not supported to wear it in the shower at the moment. You need to take off the device when taking a shower, and wear it after washing and drying your body.
Q: Why is the ECG waveform amplitude of my test data very low?
Answer: The micro-voltage value of each human surface is different, the R amplitude of the ECG is also different, and the amplitude of the ECG waveform is different.
