Feature:
1: Wide range of applications
2：2.4 inch color screen
3: Manual form: fan centre paste tutorial QR code, mobile phone scan code to get electronic tutorial
4：Chinese and English interface can be switched
5：Working mode: four modes CC-constant current mode CV-constant voltage mode CP-constant power mode CR-constant resistance mode
1: Wide range of applications
2：2.4 inch color screen
3: Manual form: fan centre paste tutorial QR code, mobile phone scan code to get electronic tutorial
4：Chinese and English interface can be switched
5：Working mode: four modes CC-constant current mode CV-constant voltage mode CP-constant power mode CR-constant resistance mode
DTL150 is a DC CNC electronic load with 2.4" TFT colour screen, maximum power 150W, maximum load current 20A, with four working modes: constant current, constant voltage, constant power and constant resistance; voltage, current and power over limit protection can be set; stop discharge voltage and discharge time can be set; power supply temperature can be monitored by external NTC sensor.
The product works with a 12V1A independent power supply and is equipped with an alloy integrated silent (20±3dBA) heat sink with an intelligent temperature control system to control the work of the heat sink fan.
Compared to traditional analogue electronic loads, the DTL150 uses a protection first and then work mode to control the discharge, which can effectively protect the discharge power supply from damage caused by over-limit and over-discharge.
The DTL150 adopts a four-wire wiring method, the voltage measurement is not affected by the voltage drop of the wire, which makes the voltage measurement more accurate.
The product works with a 12V1A independent power supply and is equipped with an alloy integrated silent (20±3dBA) heat sink with an intelligent temperature control system to control the work of the heat sink fan.
Compared to traditional analogue electronic loads, the DTL150 uses a protection first and then work mode to control the discharge, which can effectively protect the discharge power supply from damage caused by over-limit and over-discharge.
The DTL150 adopts a four-wire wiring method, the voltage measurement is not affected by the voltage drop of the wire, which makes the voltage measurement more accurate.
Specification：
Load type: DC CNC electronic load
Working voltage: DC12V with 12V 1A power adapter
Load voltage: DC0~150V
Load current: DC0~20A
Load power: 0 ~ 150W (120V above the maximum load 60W)
Wiring method: A+ V+ V- A- four-wire system, backward compatible with two-wire system
Power metering upper limit: 999.999Wh
Capacity measurement upper limit: 999.999Ah
Cumulative timing range: ddd:hh:mm:ss (days:hours:minutes:seconds)
Operating modes: four modes CC-constant current mode CV-constant voltage mode CP-constant power mode CR-constant resistance mode
Overvoltage protection: supports up to 150V overvoltage protection
Overcurrent protection: supports up to 20A overcurrent protection
Over-power protection: supports up to 150W over-power protection
Limited voltage discharge: also called low voltage protection, support, default unlimited voltage discharge, set according to your needs
Time limit discharge: supports a maximum of 99 hours:59 minutes time limit discharge
Heat sink: alloy integrated silent (20±3dBA) heat sink Internal temperature ≥40°C automatic operation
External temperature measurement: connect NTC 3950 10K 1% temperature sensor to measure and display 0~100℃ temperature
Chinese and English interface switching: supported
Zeroing of total data: supported
Voltage and current nulling: supported
Voltage open calibration: supported
Current open calibration: Support
Screen brightness adjustment: Support
Screen hibernation standby setting: supported
PC software online: not supported
Restore factory settings: Supported
Product dimensions: 165 x 95 x 80 (mm)
Product package size: 195×105×135mm
Product package weight: 625g Net weight of main unit: 400g
Paper manual: None
Instruction form: fan centre paste tutorial QR code, mobile phone scan code for electronic tutorial
Load type: DC CNC electronic load
Working voltage: DC12V with 12V 1A power adapter
Load voltage: DC0~150V
Load current: DC0~20A
Load power: 0 ~ 150W (120V above the maximum load 60W)
Wiring method: A+ V+ V- A- four-wire system, backward compatible with two-wire system
Power metering upper limit: 999.999Wh
Capacity measurement upper limit: 999.999Ah
Cumulative timing range: ddd:hh:mm:ss (days:hours:minutes:seconds)
Operating modes: four modes CC-constant current mode CV-constant voltage mode CP-constant power mode CR-constant resistance mode
Overvoltage protection: supports up to 150V overvoltage protection
Overcurrent protection: supports up to 20A overcurrent protection
Over-power protection: supports up to 150W over-power protection
Limited voltage discharge: also called low voltage protection, support, default unlimited voltage discharge, set according to your needs
Time limit discharge: supports a maximum of 99 hours:59 minutes time limit discharge
Heat sink: alloy integrated silent (20±3dBA) heat sink Internal temperature ≥40°C automatic operation
External temperature measurement: connect NTC 3950 10K 1% temperature sensor to measure and display 0~100℃ temperature
Chinese and English interface switching: supported
Zeroing of total data: supported
Voltage and current nulling: supported
Voltage open calibration: supported
Current open calibration: Support
Screen brightness adjustment: Support
Screen hibernation standby setting: supported
PC software online: not supported
Restore factory settings: Supported
Product dimensions: 165 x 95 x 80 (mm)
Product package size: 195×105×135mm
Product package weight: 625g Net weight of main unit: 400g
Paper manual: None
Instruction form: fan centre paste tutorial QR code, mobile phone scan code for electronic tutorial
List
1*Electronic load
1*Adapter
1*adapter
2*crocodile cable
1*Electronic load
1*Adapter
1*adapter
2*crocodile cable
（US to EU plug）
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Fill your shipping info
- If the item is defect when you receive it or you are not satisfied with it, please return it within 30 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
Am 24.04.2024 hat der Verkäufer die folgenden Angaben hinzugefügt: