MUCAR VO6 2024 Newest Car OBD2 Scanner,All Systems Diagnostic,Key Programming,28 Reset Maintenance for Lifetime Free Update
【 4-IN-1 Live Data Stream】maximum of 4 live data can be merged in one graphic for easier comparison.
【 Lifetime free update】over 126 car brands, over 10,000 models, this scan tool is supports 128 mainstream car brands, including 35 in Europe, 80 in Asia, and 13 in the U.S.
✔ TeamViewer to provide Remote Assistance and etc.
【WIFI UPGRADE】-- After you receive our products, for better product experience as well as car diagnositic, please connect to wifi/phone hotspot and accept or take the initiative to update APP operating system and car brand diagnostic software.
- ⚠️ 【NOTE】 If you clear the fault code directly without repairing the car and find that the fault code is still there, it is your car hardware fault still exists. We recommend that after reading the fault code, repair the car first and then clear the fault code.
MUCAR VO6 obd2 diagnostic support All System Diagnostic + 28 RESET Maintenance + 10 OBD2 Functions(Read/Clear Code+Fault Light )
OE-Level Full System Diagnoses: MUCAR VO6 OBD2 scanner provides lifetime free OBD/EOBD diagnosis of the entire car system and subsystems for one car model. Fast Scan and Read/Clear fault codes in seconds, effectively turn off the warning light.
- Including but not limited to PCM, ECM, TCM, CTM, EPS, PDM, BCM, TPM, SCCM, and RADIO etc. With complete capabilities for codes, it can read and clear codes on all vehicle systems and subsystems and is able to show the full live data stream from multiple sensors in graphics and text and turn off warning lights.
- For the Engine: Detect common problems such as poor lubrication, faulty oil pump, oil deposits and contaminants, insufficient fuel and air compression, leaking coolant, clogged engine radiators, prolonged engine detonation, damaged oxygen sensors, outdated spark plugs, etc.
- For airbags: Determine the fault area as a defective seatbelt, corroded crash sensor, water ingress in a connector, etc.
- For ABS: Diagnose blown sensor fuses, insufficient brake fluid, defective sensor, etc.
- For Transmission: avoid grinding or shaking gears, howling, humming or rattling noises, burning smell, spinning gears, low or leaking transmission fluid, etc.
- For TPMS: Check for low tyre pressure problems, faulty tyre pressure monitoring module, unknown tyre sensor, missing tyre sensor, etc.
- Read the ECU version numbers of the tested ECUs.
- Read & Clear DTCs to locate problem areas and clear the codes.
- View live data from each parameter item.
- More...
MUCAR VO6 obd2 diagnostic support 28 Maintenance Reset software(Lifetime Free)
1. Oil Light Reset. 2. Steering Angle Reset: Reset the steering angle to zero to keep the car running straight.
3. Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.
4. IMMO Service: Disable any lost keys and new keys. **ONLY for cars with easy IMMO system. If you need key programming, see THINKCAR PD8.
5. DPF Regeneration. 6. EGR Adaption: Learn the Exhaust Gas Recirculation valve after being cleaned.
7. ABS Bleeding : Help exhaust the air.
8. SCR Reset: Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
9. Throttle Matching: Initialize the throttle actuators to the default state. 10. TPMS Reset: Reset the tire pressure.
11. EPB Reset : Help replace and reset the brake pad. 12. Tire Reset: Set the size parameters of the modified or replaced tire.
13. AFS Headlamp Reset: Initialize the adaptive headlamp system. 14. Sunroof Initialization: Initialize the sunroof when locked off or closed.
15. Battery Reset: Register the battery after replacement. 16. Seat Calibration: Calibrate the memory in replaced or repaired seats.
17. Airbag Reset: Resets the airbag data to clear the airbag collision fault indicator. 18. A/F Reset: Set or learn Air/Fuel ratio parameters.
19. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality. 20. Transport Mode: Deactivate the transport mode.
21. Windows Calibration: Perform door window matching to recover ECU initial memory. 22. Language Change: Change vehicle system language.
23. Suspension Reset: Adjust the vehicle body height sensor for level calibration. 24. NOx Sensor Reset: Reset catalytic converter learned value stored in ECU. 25. Stop/Start Reset: Set up the automatic start-stop function in ECU.
27. Coolant Bleeding: Activate the electronic water pump. 28. Suspension Reset: Adjust the vehicle body height sensor for level calibration.
MUCAR VO6 SCANNER - A Full OBD2 Function Diagnostic Tool for the Home Mechanic
Full 10 modes of OBD2 functions
- Mode 01✔️Read Dynamic Data Streams(Live Data): Read and display the real-time operating data of the car's ECU / PCM. ✔️Fault light indication.✔ I/M readiness status: Indicates whether the various emission-related systems of the vehicle work properly.
- Mode 02✔️Freeze Frame Data Query: Graphically records functions and stores freeze frame data.If the vehicle has an error, an error code will be generated and the still image can be used to display vehicle data at the time of error code generation.
- Mode 03✔️Read Codes: View the detailed description of the diagnostic trouble code (DTCs).
- Mode 04✔️Delete Codes: Turns off the fault indicator light (MIL), clears codes and resets monitors.
- Mode 05✔️O2 sensor test: With the O2 sensor test function, you can retrieve and display the test results of the O2 sensor monitor from the vehicle's on-board computer to display the last test carried out. To determine if your vehicle has exceeded the emissions.
- Mode 06✔️On-board Monitor Test: Retrieves and displays test results for emission-related drive train components and systems.
- Mode 07✔️Read Pending Fault Codes(DTCs) Mode 08✔️Component Test: Certain vehicle components can be operated by scanner commands to test their functionality. EVAP test: With the EVAP test function, you can initiate a leakage test of the vehicle's EVAP system.
- Mode 09✔️Vehicle information: Read the information about the current vehicle ECU version. Retrieving vehicle information (VIN, CIN and CVN)
- Mode 10✔️Read Permanent Fault Code.
Auto VIN TechnologyAuto VIN Technology: Skip the manual input and automatically receive vehicle make, model, year, and other information. | Lifetime free WiFi UpdateLifetime free WiFi Update with one click, over 126 car brands, over 10,000 models, car models supports 128 mainstream car brands, including 35 in Europe, 80 in Asia, and 13 in the U.S. | Timely Diagnostic SupportMUCAR VO6 scan tool OBD2 full functions support remote diagnosis function to help you diagnose car troubles more accurately and quickly. The OE-level staff is online for you 7/24.When you encounter any problems during the diagnosis please feel free to submit and upload the diagnosis report, professional technicians will solve the problem for you. |
Support 28 Multi-Langauge
Do you want to use your native language for diagnosis? Don’t worry, MUCAR VO6 provides multiple languages for you to switch ,English , French , Spanish , German , Russian , Italian , Portuguese , Japanese ,Polish
Support 128+ Worldwide Vehicle Coverage
European and American area
For Ford Europe, For Mercedes-Benz commercial vehicles, For MINI, For West, For Audi, For GMSA, For Fiat, For Opel, For GAZ, For Peugeot, For Volkswagen, For Porsche, For Citroen, For Skoda, For Rover, For Land Rover, For Volvo, For VAZ, For Renault,For Elves, For Mercedes-Benz, For Jaguar, For Dacia, For Lancia, For BMW, For Romeo,For Saab, For Ford, For Chrysler, For GM.
Asia-pacific region
For Thailand Isuzu, For Acura, For Daewoo, For Jianghuai cars (GM), For Ssangyong, For Infiniti,For Proton, For Honda, For Mazda,For Perodua, For Jiangling Automobile, For Mahindra (MAHINDRA),For Isuzu, For Suzuki, For Byd auto,For Chery cars, For Toyota, For Nissan, Kia, The Car, For The Great Wall in cars, For Daihatsu, For Changan automobile, For Geely automobile, For Xiamen Jinlong, Zhongxing automobile, For Hafei automobile, For New Kay, For Gonow automobile, For Changhe automobile, For Hyundai, For Liuzhou Wuling, For Subaru, For Xiali, For Australia ford,For Mitsubishi, For TATA, For Zhongtai automobile, For Horton, For MARUTI, For Lexus.
How to Register/Update MUCAR VO6
1.Initial Use
2.Turn on the Machine
3.Language Setting
4.Connect WIFI
5.Choose Time Zone
6.User Agreement
7.Create an Account
8.Typing in Business Information
FAQ:
Here we list some common questions and answers related to this tool.
Q: Why does it have no responses when connected to a car computer?
A: Check whether the connection with the vehicle diagnostic socket is normal, whether the ignition switch is on, and whether the tool supports the car.
Q: Why does the system stop while reading the data stream?
A: This may be caused by loose diagnostic dongles. Please unplug the dongle and reconnect it firmly.
Q:Communication error with vehicle ECU?
A: Please confirm:
1.Whether diagnostic dongle is correctly connected.
2.Whether ignition switch is ON.
3. If all checks are normal, send vehicle year, make, model and VIN number to us using
Feedback feature.
Q: Why does the host screen flash when the engine ignition starts?
A: It is normal and caused by electromagnetic interference.
Q: How to upgrade the system software?
A: 1. Start the tool and ensure a stable Internet connection.
2.Go to ""Set up"" -> ""App Update"", click ""OTA"" and then click ""check version"" to enter the system upgrade interface.
3. Complete the process by following the instructions on the screen step by step. It
may take a few minutes depending on the internet speed. please be patient. After successfully completing the upgrade, the tool will automatically restart and enter the main interface.
Q: Please explain the account and points.
A: To use MUCAR VO6, you need to register an account. Each account has the opportunity to earn points by recommending others to buy products and participating in official events. 1 point can be deducted for 1 dollar when purchasing products or services
Q: How to capture the screenshot?
A: A""Screenshot"" icon is always floating on the screen. Tap it to capture the current screen and the screenshot is saved in the Think File module.
Product Parameters:
Display Screen :5.99-Inch/TFT(IPS)
Connection :Wi-Fi/Bluetooth
RAM:2G
ROM:16G
Working Temperature : 32℉~122℉
Storage Temperature: -4℉~144℉
Packing List:
1*MUCAR VO6 Host
1*Diagnostic dongle
1*Charging cable
1*Multi-Language Manual
1*power adapter