Note:

1.It will be better if you can check with the above chart to make sure if this radiator will fit your vehicle.

2. The radiator cap that has not passed the test can't release the pressure when it reaches the pressure value.
3. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.
4. The radiator fan does not turn, resulting in high temperature in the water tank.
5. After loading the product on your vehicle  and adding the coolant, tighten the rotary cover and leave your vehicle idling for 10-20 minutes. After completely cooling the coolant, open the cover and fill the product with coolant. Please make sure there is no gas in the product.
6. Before you start up your vehicle, please make sure there is coolant in the radiator.

Features:

1. The Core was made from high quality Aluminum.  Effective Heat Dissipation.

2. Good sealing.  All of the new radiators will be inspected before selling (including 100% leaking test).

3. Direct Replacement, easy to be installed.  

4. Radiator is really easy to get damaged during delivery. We have upgraded our package design to avoid this kind of problem.

Interchange Part Number:   

1889, 1894, 52401486, 52472846, 52476951, 52485608, 89018556, CU1889, GM3010102, Q1889, RAD1889, 1890, 1887

Fitment:

1997-1999 For Buick Century 3.1L

1997-1999 For Buick Regal 3.8L

1997-2000 Oldsmobile Silhouette 3.4L

1997-2003 Pontiac Grand Prix 3.1L

1997-2003 Pontiac Grand Prix 3.8L

1997-1998 Pontiac Trans Sport 3.4L

1998-1999 Oldsmobile Intrigue 3.8L

1999 Oldsmobile Intrigue 3.5L

1999-2000 Pontiac Montana 3.4L

Package Including:

As the picture shows

Use and maintenance:

1. The radiator should not be in contact with any acid, alkali or other corrosive properties.

2. It is recommended to use soft water. Hard water should be used after softening treatment to avoid blockage of the radiator and the generation of scale.

3. Use antifreeze, in order to avoid corrosion of the radiator, be sure to use a long-term anti-rust and antifreeze that is produced by a regular manufacturer and meets national standards.

4. In the process of installing the radiator, please do not damage the radiator (sheet) or bump the radiator to ensure the heat dissipation capacity and sealing.

5. When the radiator is completely drained and then filled with water, turn on the drain switch of the engine block first, and then close it when water flows out to avoid blisters.

6. In daily use, check the water level at any time, and add water after stopping the machine to cool down. When adding water, slowly open the water tank cover, and the operator should stay away from the water filling port as much as possible to prevent burns caused by high-pressure steam spraying from the water filling port.

7. In winter, in order to prevent the core from rupturing due to freezing, such as long-term parking or indirect parking, the water tank cover and drain switch should be released to release all the water.

8. The effective environment of the spare radiator should be kept ventilated and dry.

9. Depending on the actual situation, the user should completely clean the core of the radiator within 1 to 3 months. When cleaning, rinse with clean water along the reverse side of the air inlet.

10. The water level gauge should be cleaned once every 3 months or depending on the actual situation, all parts are removed and cleaned with warm water and non-corrosive detergent.