More precise and easy to read distance display for the rollers in inches (0-0.095 inch)

Equipped with stainless steel rollers = wet milling possible

Condition: New and of good quality

Silver

Type: grain crusher

2 wheels: stainless steel

Grinding housing: aluminum

Funnel: stainless steel

Speed: 3.6kg/min

Overall Height: 260mm (10.2")

Hopper Dimensions Top: 220 x 210mm (8.7" x 8.3")

Mill footprint: 140 x 80 mm (9.4" x 3.1")

Roll Dimension: 76 x 150 x 50mm (3" x 6" x 2")

Single roll: ø 38 x 150mm (1.5" x 6")

The ribbed rollers are adjustable at both ends of the slot.

Roller adjustable approx. 0.1 - 2.5 mm

With 2 aluminum poles

Crank Handle: 120mm (4.7")

NEW 2 roller malt mill, grain mill, home brewery, barley crusher homebrew

Characteristics:

Width and roll diameter are optimized for use with power drills

Adjustable rollers at both ends for an even squeeze

12 TPI knurling to efficiently pull grain through the rollers while leaving the hull intact to create an excellent filter bed to bubble through

6" long adjustable gap

Fully adjustable grinder

0.060" fixed primary gap, 0-0.065" fully adjustable secondary gap

Two eccentric stainless steel adjusters without abrasion

8 lbs/minute is the average throughput

6" x 1.5" diameter stainless steel rollers

The crankshaft can be rotated clockwise or counterclockwise

Robust aluminum frame

SAE 841 oil impregnated bronze bushings

High-performance two-roller mill with adjustable secondary gap distance

Integrated drive shaft and axles

The mill can be hand cranked or motorized with a corded electric drill

You need to deliver or build a base

This grain mill is made of materials that will last a lifetime. Cold rolled steel for the rollers and aluminum for body and stainless steel funnels and oil impregnated brass bushings. The Grain Mill is professional in grinding barley, wheat and other grains. It is equipped with adjustable 2 rollers, which can crush the grain well and peel off the husk perfectly, to be good for brewing beer in the future. The main advantage of the 2-roller design is that it pulls the grain better and offers improved throughput.

This equipment is perfect for large batches and high efficiency milling. With two rollers, all your grain is crushed twice in one cycle. Squeezing occurs through the fixed gap between the two top rollers. The first pass slightly flattens the grain, preparing it for the next crush, which breaks up the grains and loosens the starch with minimal shell damage.

The hopper can hold up to 30kg of grain and the roller body Highlightss an aluminum block frame housing three steel rollers on oil-impregnated bronze bushings. The drive shaft and all axles are integrated into the roller, allowing clockwise or counterclockwise drive. A hand crank is included, but the mill can easily be motorized with a corded electric drill. You don't need any extra attachments, just stick on the drill and you're good to go. Stainless knurled knobs allow for a .070 inch gap spacing adjustment range. Adjustment is easy - just loosen the set screws, set the gap and tighten the set screws.

Note

You must supply or build a base to place the mill over a grain bin or 5-gallon bucket.

Delivery content:

2 aluminum poles

1 St. Malt Mill

1 piece funnel

1 pc crank handle