Description:

Keep an eye on your outdoor water tank from the comfort of your own living room, up to 100m away. Installed at the top of your water tank, the transmitter unit measures the water level using an ultrasonic sensor and temperature using a thermo sensor. You can the receiver unit on a wall or pull out the stand and place it on your kitchen bench top, table or desk. View your room's temperature, tank temperature and water level (represented by a 10 bar graph). You can store min/ records and set alarms for specific water levels (high/low) or when empty.


Features:
  • This meter monitors tank liquid depth level, and displays on a 10- LCD bar graph.
  • It can keep min/ records of tank liquid level.
  • Supports tank liquid level high/low alarm and tank liquid empty alert.
  • Displays indoor temperature (℉ or ℃) and tank temperature (℉ or ℃) at the same time.
  • The receiver can be put standing on desk or hanging on wall.


Specification:

Indoor Temperature Range: 0~50℃

Outdoor Temperature Range: -40~60℃

Temperature Accuracy: ±1oC

Water Level Measure Rang: 0~15m

            Resolution: 0.01m

            Accurate: +/-0.0

Transmission Frequency: 43HZ

Transmission Range: 100 meters(300 feet)in open area

Transmission Interval: 30s when level changes or 3 minutes when level does not change

Receiver Battery: 2X AA 1.5V LR3 Alkaline batteries (Not included)

Transmitter Battery: 6X AAA 1.5V LR6 Alkaline or lithium batteries (Not included)

Battery Life: Minimum 12 months for receiver

                  Minimum 12 months for transmitter

Receiver Size: 108*94*27mm

Transmitter Size: 97*68*152mm

LCD Size: 66*45mm(3.3 inch)

Suitable Liquid Type: All non-corrosive liquid

Open Distance: Approx.100M/328.1ft
Effective Distance : Approx.30M/98.4ft


Package Includes:

1 x Water Level Sensor Transmitter

1 x Indoor Receiver

2 x Screws

(Batteries are NOT included)


Note:

Note that the product is not waterproof.
1. Install the battery in the battery compartment of the transmitter, do not insert the battery compartment, and insert the battery synchronously after the receiver is set up 
2. The liquid level indicator has no data, press the tank key, and the data will be displayed.
3. When reset, remove the battery Wait for a while and then turn on the power to eliminate the remaining power in the machine.
4. Whether the red light of the transmitter flashes, the flashing is normal, and .
  



 

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

 

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. 

https://image-us.chengykj.com/upload/third_resource/image/feedback.jpg


We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. 

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg

On Jun 30, 2024 at 18:58:35 PDT, seller added the following information:

DataCaciques