Our LED retrofit kit is a cost-effective, long-term solution for exterior lighting fixtures. The 6 Watt, high-efficacy LED kit can replace a 100-watt incandescent source while significantly reducing your home's energy costs. The retrofit kit features 30 757 LEDs and provides a 120-degree light output. The LED board was built specifically for the provided 12V Power Supply, and the photocell switch makes it so you can set and forget your outdoor lighting fixture.

This LED kit is perfect for replacing cheaply built light sources in high-end fixtures or for retrofitting legacy lighting fixtures using incandescent or halogen bulbs. 

6W LED Light Engine

The LED board was initially designed to replace cheap LED boards in outdoor lighting fixtures. This 6W board takes a simple 12V input due to onboard driver circuitry. The board was designed for easy-install with two poke-home input connections. Below the connection point is a .3" hole for discrete wiring.

Heatsinking - Extend Lifetime

To ensure your LEDs never overheat, it is best to use a small heatsink with the LED board. Most LED fixtures you will be replacing already have an aluminum plate acting as a heatsink that you can mount the Draco to. If you need to fit a heatsink directly to the LED, remember to find one suitable for 6 Watts of power (the total surface area roughly needs to be 6 square inches).

The LED PCB has convenient .12" diameter mounting holes in each corner. We recommend 4-40 machine mounting screws and the washers should not exceed .25" in diameter. An alternative mounting method to machine screws is thermal adhesive tapes or pastes.