Method of Use:
1.Identify the point of damage or puncture.
2.Select patch &, if appropriate, cut to size.
3.Clean & dry area to be patched.
4.Apply the glue to the area to be patched and to the patch, then immediately clean the glue tube nozzle and cap, and reseal the tube (or the remaining glue in the tube will begin to cure).
5.Spread glue evenly, then apply the patch and ensure close contact with the damaged area (use clamps or weights) for 48 hours. Avoid pressing the glue through the puncture onto the opposite side of the air chamber to prevent unintended bonding.
6.After 48hrs, check that there is no remaining leakage from air chamber.
Usage Tips: PVC adhesive is a type of solvent-based adhesive, therefore, it is important to apply it in an appropriate amount and evenly without spreading it too thick or excessively.
NOTICE:
1.Please try it on a small area before using it on a large area.
2.After opening the product, please promptly clean any residual glue from the container's lid.
3.In case of contact with eyes, rinse thoroughly with plenty of water.
4.Please store the product away from children.
5.During use, keep it away from potential sources of ignition.