[Name] PP-R Plastic Pipe Fusion Splicer     
[Specification] 20-32 type [Color] Red handle
Product Description:
Power:600W (subject to heating time) Note: the welding quality of the pipe and the melting point of the plastic pipe related to the melting point that is related to the temperature of the heat fusion device has nothing to do with the size of the power, can not be adjusted to increase the temperature to improve the melting speed of the welded pipe
Ambient Temperature: -20℃~50℃
Relative Temperature: 45%~95%.
Voltage range:220V(10%)/50Hz(5%)
Surface temperature of heated welding head:260℃±5
Index: Insulation resistance not less than 1MΩ
Leakage current:≤5mA(AC RMS)

Usage
Installation of heating mold head:

    Install the heating die head in pairs as needed and tighten it with 8mm hexagonal wrench. (In the heating process, the heating die head should be tightened with tools).

Second, fixed fusion splicer:

    Matching fixed frame placed on the work surface (if necessary, fixed with a chuck), inserted into the fusion splicer.
Third, energize the switch:
Turn on the power (△ attention to the power supply, must be grounded) yellow indicator light, open the power switch, adjusted to the desired temperature. Heating indicator light, the red indicator light begins to flash. When the heating indicator light off, the temperature control indicator light is always on, indicating that the temperature has reached the set temperature, you can start working.

Note: Iron box on the way to delivery is inevitable courier violence, such as broken flat case is normal Mind careful shooting We will try to pack well!