Product Description
SATA To IDE HDD Converter Adapter Serial To Parallel IDE To SATA CD SSD Riser Card with 7-pin SATA Data Cable and IDE Power Cable for Laptop Desktops
Feature:
1. IDE to SATA Two-way HDD adapter: This IDE to SATA Two-way HDD adapter card allows you to convert between IDE and SATA, making it easy to use different types of hard drives and devices.
2. Simple installation process: The installation process of hard drive converter is straightforward and requires only a few simple steps. Ensure that your computer is turned off before beginning, and follow the instructions carefully.
3.Easy conversion from SATA to IDE: A. Shut down the computer before operation; B. Open the computer case, insert the riser card into the ide interface of the motherboard; C. Connect one end of the sata data cable to the sata interface of the riser card, and the other end to On the sata interface of the hard disk; D. Set the switch and jumper according to the instructions on the riser card label; E. Connect the power cable of the equipped riser card (note that the direction cannot be reversed). At the same time, plug in the power cord of the sata hard disk. After the computer is connected, the computer can correctly identify the connected sata device and it can be used normally.
4.Simple conversion from IDE to SATA: A. Shut down the computer before operation; B. Open the computer case, insert one end of the sata data cable into the sata interface on the motherboard, and connect the other end to the sata interface of the adapter card; C. The jumper is on the side of the optical drive The above European instructions need to be set as the main board: Master; D. Insert your ide hard disk into the ide interface of the adapter card (pay attention to the front and back of the card to avoid wrong insertion), the ide interface interface of the adapter card has anti-reverse The raised design of the plug can be inserted in the center. At the same time, your ide hard disk needs to be the main disk; E. Connect the power cable of the adapter card (note that the direction cannot be reversed) and plug in the power cable of the ide hard disk at the same time. The host computer correctly recognizes the connected ide hard disk, and it can be used normally.
5. Compatible with various operating systems: This SATA to IDE Two-way SSD riser card is compatible with a wide range of operating systems, making it versatile and convenient to use.
Model Number: SATA to IDE Two-way Adapter Card
Name: SATA to IDE Two-way Adapter Card
Product size: About 5.2x4.6x4.1cm/2.04x1.81x1.61in
Color (optional): black, red
Main control IC: JM20330
System support: Windows
Points to note:
1. When the IDE hard disk is transferred to the sata motherboard, the jumper of the hard disk needs to be set as the main disk.
2. The riser card needs an external power supply to work normally.
3. You need to turn off the computer when connecting the riser card.
Feature:
1. IDE to SATA Two-way HDD adapter: This IDE to SATA Two-way HDD adapter card allows you to convert between IDE and SATA, making it easy to use different types of hard drives and devices.
2. Simple installation process: The installation process of hard drive converter is straightforward and requires only a few simple steps. Ensure that your computer is turned off before beginning, and follow the instructions carefully.
3.Easy conversion from SATA to IDE: A. Shut down the computer before operation; B. Open the computer case, insert the riser card into the ide interface of the motherboard; C. Connect one end of the sata data cable to the sata interface of the riser card, and the other end to On the sata interface of the hard disk; D. Set the switch and jumper according to the instructions on the riser card label; E. Connect the power cable of the equipped riser card (note that the direction cannot be reversed). At the same time, plug in the power cord of the sata hard disk. After the computer is connected, the computer can correctly identify the connected sata device and it can be used normally.
4.Simple conversion from IDE to SATA: A. Shut down the computer before operation; B. Open the computer case, insert one end of the sata data cable into the sata interface on the motherboard, and connect the other end to the sata interface of the adapter card; C. The jumper is on the side of the optical drive The above European instructions need to be set as the main board: Master; D. Insert your ide hard disk into the ide interface of the adapter card (pay attention to the front and back of the card to avoid wrong insertion), the ide interface interface of the adapter card has anti-reverse The raised design of the plug can be inserted in the center. At the same time, your ide hard disk needs to be the main disk; E. Connect the power cable of the adapter card (note that the direction cannot be reversed) and plug in the power cable of the ide hard disk at the same time. The host computer correctly recognizes the connected ide hard disk, and it can be used normally.
5. Compatible with various operating systems: This SATA to IDE Two-way SSD riser card is compatible with a wide range of operating systems, making it versatile and convenient to use.
Specification:
Model Number: SATA to IDE Two-way Adapter Card
Name: SATA to IDE Two-way Adapter Card
Product size: About 5.2x4.6x4.1cm/2.04x1.81x1.61in
Color (optional): black, red
Main control IC: JM20330
System support: Windows
Points to note:
1. When the IDE hard disk is transferred to the sata motherboard, the jumper of the hard disk needs to be set as the main disk.
2. The riser card needs an external power supply to work normally.
3. You need to turn off the computer when connecting the riser card.
Note:
1. It needs to be installed in a power-off state, and hot swapping is not supported.
2. Due to different product batches, the color or appearance of the accessories may be slightly different from the link picture and the previous batches, which will not affect the use, please do not take photos if you mind.
3. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
4. Please allow 1-2cm measuring deviation due to manual measurement.
Included
1 x HDD Adapter Card
1 x 7-pin SATA Data Cable
1 x IDE Power Cable
1 x 7-pin SATA Data Cable
1 x IDE Power Cable
Pictures
Payment
- * We accept multiple payments.
- * All major credit cards are accepted through secure payment processor PayPal.
- * Payment must be received within 7 business days of auction closing.
- * If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
- * Refunds are normally issued with 2 working days.If you need any further information regarding payments,please contact us via eBay message.
- * If you have any special requests, please send us a message before making the payment.
- *NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
- Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.
Warranty
- * 12 months Warranty. Buy with confidence!
- * If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact me before you return it.
- * If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item.
- * If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.
Shipping
- * We ship from the item location.
- * Items will be shipped within 3 business day(S) after payment completed received.
- * NOTE: Please check the parcel before sign for it, If any problem with the parcel please mark on the signature that "Damaged when received" when signing it. Thank you.
Policies
- * We are not responsible for any custom duty or import tax.
- * We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receive it.
- * All messages will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible.
- * Serious Buyer Only! Please place bid only if you agree with all the terms.
- * If you have any problems or concerns whatever with your order or products, please message us and give us a chance to assist you before you leave any feedback. We believe we can produce a positive outcome to any situation and will work hard to earn your praise.
- * If you were pleased with this transaction, Please give us 5 star rating, thanks!
Contact Us
- * Our office hours are 9:00 a.m to 6:00 p.m (GMT +8) of Monday to Saturday.
- * And our Office is closed on Sunday and public holidays.
- * We apologize for the late reply during the holidays.