banner

433Mhz Wireless RF Switch Long Range DC 12V 4CH 4Channel Wireless Remote Control Switch, Relay Receiver Module, Transmitter Momentary Toggle Switch RF Relay (4 Transmitter & 1 Receiver)

Description

Current Rating 10 Amps
Coil Voltage 12 Volts
Operation Mode Automatic
Contact Type Normally Open
Package Dimensions 6.3 x 6.22 x 1.3 inches; 7.83 ounces

  • 【Long Range】 Signal can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance. Range is up to 138ft/40m with no obstacle.
  • 【4CH for More Control】Adjustable working way, control equipment turn/reverse, o n/off. Switch Self-lock, Jog, Inter-lock.
  • 【Easy to use & Security 】Learning code has high-level security for its low repetitive rate and extremely easy to setup, learn by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it.
  • 【Reliable Quality】The equipped remote control transmitter is more beautiful and better quality than ordinary remote controlStable and reliable performance, high receive sensitivity.
  • 【Wide Application】WIDE range of APPLICATIONS from simple domestic remote control to autonomous control such as, window, entrance, Garage Doors, alarm system, lifting equipment and so on. NOTE♥Please email us if you meet any problem, we are always here to help, thanks!

Product Description

433Mhz Wireless RF Switch DC 12V 4CH

Momentary Mode:

Press and hold the remote button , the relay connects, release the remote button , the relay dis-connects. Usually used for garage door opener.

Toggle Mode:

Press once the remote button , the relay connects , press the remote button again , the relay dis-connects . Usually used for lamp or other on/off control.

Latched Mode:

Press a button on the remote control, the corresponding relay connects , and the other relays dis-connect. Usually used for one-time event safety or interlock.

DC 5~24V Remote Control Switch

Working Voltage & Quiescent Current: DC12V & 5mA

Working Frequency: 433Mhz

Output Current: ≤10A

Receiving Sensitivity: >104dBm

Function option: Momentary / Toggle / Latched

Modulation Mode: ASK

Matching Mode: Intelligent Learning code

Output Mode:Dry contact / Voltage output

3 basic operating modes

Momentary Mode

Press the learn button on the receiving board once→The indicator light is on, indicating that it has entered the Momentary mode setting state.

Press any button on the remote control to pair→The indicator flashes 3 times.

Set successfully!

Toggle Mode

Press the learn button on the receiving board twice→The indicator light is on, indicating that it has entered the Toggle mode setting state.

Press any button on the remote control to pair→The indicator flashes 3 times.

Set successfully!

Latched Mode

Press the learn button on the receiving board 3 times→The indicator light is on, indicating that it has entered the Latched mode setting state.

Press any button on the remote control to pair→The indicator flashes 3 times.

Set successfully!

Other combined operating modes

2CH Momentary + 2CH Toggle :

Press the learning button on the receiving board 4 times, after the indicator light is on, press any remote control button, the indicator light flashes 3 times, and the setting is successful!

2CH Momentary + 2CH Latched :

Press the learning button on the receiving board 5 times, after the indicator light is on, press any remote control button, the indicator light flashes 3 times, and the setting is successful!

2CH Toggle + 2CH Latched :

Press the learning button on the receiving board 6 times, after the indicator light is on, press any remote control button, the indicator light flashes 3 times, and the setting is successful!

2CH Latched + 2CH Latched :

Press the learning button on the receiving board 7 times, after the indicator light is on, press any remote control button, the indicator light flashes 3 times, and the setting is successful!

Deleting existing remote controls data:

pressing 8 times the learning key button on the receiver board , the LED indicator on receiver board will flash for eight times , the existing remote controls are deleted successfully !

433Mhz Wireless RF Switch Long Range DC 12V 4CH 4Channel Wireless Remote Control Switch, Relay Receiver Module, Transmitter Momentary Toggle Switch RF Relay (4 Transmitter & 1 Receiver)

ABOUT US

We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more.

SHIPPING

We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.

We offer free shipping to the lower 48 states and ship within 2 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address.

For shipping outside of the continental USA, we only use eBay's Global Shipping Program.The item is shipped to KY and then sent to the rest of the world. International customers are responsible for all duties and taxes. Continue to check out in order to calculate costs for shipping the item to your country. Messages regarding eBay's Global Shipping Program MUST be directed at eBay EXCLUSIVELY.

RETURNS

We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA.

PAYMENT

We accept PayPal.

CONTACT US

This page content is yet to come
Please ad us to your favorite seller and visit again later
Thank You

CUSTOMER SATISFACTION

We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.