ESP32-CAM Development Board
Features:
Low-power dual-core 32-bit CPU for application processors.
Main frequency up to 240MHz, computing power up to 600 DMIPS.
Built-in 520 KB SRAM, external 4M PSRAM.
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
Support OV2640 and OV7670 cameras, built-in flash.
Support image WiFi upload.
Support TF card.
Support multiple sleep modes.
Embedded Lwip and Free RTOS.
Support STA/AP/STA+AP working mode.
Support Smart Config/AirKiss one-click distribution network.
Support secondary development.
Specification:
Voltage: 5V
Current: 2A
Dimensions: 2.7x4cm/1.06x1.57inch
Color: As shown
Quantity: 1Pc
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1 x Development Board
Low-power dual-core 32-bit CPU for application processors.
Main frequency up to 240MHz, computing power up to 600 DMIPS.
Built-in 520 KB SRAM, external 4M PSRAM.
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
Support OV2640 and OV7670 cameras, built-in flash.
Support image WiFi upload.
Support TF card.
Support multiple sleep modes.
Embedded Lwip and Free RTOS.
Support STA/AP/STA+AP working mode.
Support Smart Config/AirKiss one-click distribution network.
Support secondary development.
Specification:
Voltage: 5V
Current: 2A
Dimensions: 2.7x4cm/1.06x1.57inch
Color: As shown
Quantity: 1Pc
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1 x Development Board
ESP32-CAM-MB+OV2640 Camera
Introduction：
The ESP32-CAM-MB module is a small camera module with a size of 39.8*27*. This module can work independently as the smallest system. A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz. Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
Basic performance parameters
1. Use low-power dual-core 32-bit CPU, which can be used as an application processor.
2. The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS
3. Built-in 520 KB SRAM, external 8MB PSRAM
4. Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces
5. Support OV2640 and OV7670 cameras, built-in flash
6. Support picture WiFI upload
7. Support TF card
8. Support multiple sleep modes.
9. Embedded Lwip and FreeRTOS
10. Support STA/AP/STA+AP working mode
11. Support Smart Config/AirKiss one-click network configuration
12. Support secondary development
Application scenarios
1. Home smart device image transmission
2. Wireless monitoring
3. Smart agriculture
4. QR wireless recognition
5. Wireless positioning system signal
6. And other IoT applications
|
Parameter |
Description |
|
Working Voltage |
4.75-5.25V |
|
SPIFlash |
Default 32Mbit |
|
RAM |
Internal 520KB+ 8MB PSRAM |
|
Wi-Fi |
802.11b/g/n/e/i |
|
Bluetooth |
Bluetooth 4.2BR/EDR and BLE standard |
|
Supported interface
（2Mbps）
|
UART、SPI、I2C、PWM |
|
Support interface
TF Card
|
Max. 4G |
|
IO Port |
9 |
|
Serial port rate |
Default 115200bps |
|
Spectrum range |
2400-2483.5MHz |
|
Antenna form |
Onboard PCB Antenna , Antenna Gain 2dBi |
|
Image output format |
JPEG(Only OV2640 Support),BMP,GRAYSCALE |
|
Packaging method |
DIP-16 |
|
Transmit power |
802.11b:17±2dBm (@11Mbps) 802.11g:14±2dBm (@54Mbps) 802.11n:13±2dBm (@MCS7) |
|
Receiving sensitivity |
CCK,1Mbps:-90dBm CCK,11Mbps:-85dBm 6Mbps(1/2BPSK):-88dBm 54Mbps(3/464-QAM):-70dBm MCS7(65Mbps,72.2Mbps):-67dBm |
|
Power consumption |
Turn off the flash:180mA@5V Turn on the flash and adjust the brightness to maximum:310mA@5V Deep-sleep:Minimum 6mA@5V Moderm-sleep:Minimum 20mA@5V Light-sleep:Minimum 6.7mA@5V |
|
Safety |
WPA/WPA2/WPA2-Enterprise/WPS |
|
Operating temperature |
-20 ℃~ 70 ℃ |
|
Storage environment |
-40 ℃~ 125 ℃, < 90%RH |
|
weight |
10g |
Package Include:1x ESP32-CAM-MB 5V WIFI Bluetooth Development Board USB CH340G
OV2640 Camera
Feature:
The OV2640 image sensor features 2 megapixels (1632x1232 pixels)
Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor.
Through the SCCB control, you can output the entire frame, sub-sampling, take the window, and a variety of resolution 10-bit sampling data.
The product UXGA images up to 15 frames per second.
The user can fully control the image quality, data format and transmission mode.
Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor.
Through the SCCB control, you can output the entire frame, sub-sampling, take the window, and a variety of resolution 10-bit sampling data.
The product UXGA images up to 15 frames per second.
The user can fully control the image quality, data format and transmission mode.
Specification:
High sensitivity for low-light applications
Low voltage for embedded applications
Standard SCCB interface, compatible with I2C interface
RawRGB, RGB (GRB4: 2: 2, RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output format
Supports UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40x30 size
Supports VarioPixel sub sampling mode
Automatic impact control functions include: automatic exposure control, Automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
ISP with noise cancellation and dead pixel compensation
Support image scaling
Lens loss compensation
Saturation automatic adjustment
Edge enhancement automatic adjustment
Noise reduction automatic adjustment
Sensing array: 1632x1232
Maximum format: UXGA IO
Voltage: 1.7V -3.3V
Analog voltage: 2.5 -3.0V (internal LDO to power supply 1.2V)
Power consumption TBD sleep: <20μA
Temperature operation: -30°C to 70°C
Stable working: 0°C to 50°C
Output format (8-bit)
YUV / YCbCr4: 2: 2 RGB565 / 555/444
GRB4: 2: 2 Raw RGB Data
Optical size: 1/4"
Viewing angle: 25 Degree
Maximum rate: 15fps
SXGA sensitivity: 1.3V / (Lux-sec )
Signal to noise ratio: 40dB
Dynamic range: 50 dB
View mode Progressive electron exposure 1 line to 1247 lines
Pixel area: 2.2 μm x 2.2 μm
Dark current: 15 mV/s at 60°C
Package Included:
1 x OV2640 2.0 MP Mega Pixels 1/4'' CMOS Image Sensor SCCB Interface Camera Module
High sensitivity for low-light applications
Low voltage for embedded applications
Standard SCCB interface, compatible with I2C interface
RawRGB, RGB (GRB4: 2: 2, RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output format
Supports UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40x30 size
Supports VarioPixel sub sampling mode
Automatic impact control functions include: automatic exposure control, Automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
ISP with noise cancellation and dead pixel compensation
Support image scaling
Lens loss compensation
Saturation automatic adjustment
Edge enhancement automatic adjustment
Noise reduction automatic adjustment
Sensing array: 1632x1232
Maximum format: UXGA IO
Voltage: 1.7V -3.3V
Analog voltage: 2.5 -3.0V (internal LDO to power supply 1.2V)
Power consumption TBD sleep: <20μA
Temperature operation: -30°C to 70°C
Stable working: 0°C to 50°C
Output format (8-bit)
YUV / YCbCr4: 2: 2 RGB565 / 555/444
GRB4: 2: 2 Raw RGB Data
Optical size: 1/4"
Viewing angle: 25 Degree
Maximum rate: 15fps
SXGA sensitivity: 1.3V / (Lux-sec )
Signal to noise ratio: 40dB
Dynamic range: 50 dB
View mode Progressive electron exposure 1 line to 1247 lines
Pixel area: 2.2 μm x 2.2 μm
Dark current: 15 mV/s at 60°C
Package Included:
1 x OV2640 2.0 MP Mega Pixels 1/4'' CMOS Image Sensor SCCB Interface Camera Module
2.4G Antenna
Description:
Frequency:2.4Ghz
Gains: 3dbi
Cable type:1.13 cable
Cable Length: 5.5cm
Total Length: 23cm
Body Material: Brass
Connector:Ufl/Ipx connector
Condition:New,Brand new,100% unused.
Package Included:
1x 2.4GHz WIFI Antenna 3dbi Ufl IPX Connector Aerial 29cm Cable HLK-RM04 ESP-07
ESP32-CAM module
Introduction (1)
ESP32-CAM-Integrated CH340 WIFI Bluetooth development board OV2640 camera module Support manual and automatic download MICRO USB interface USB to serial port CH340
Product name: ESP32-CAM-CH340 camera module
Product model: HW-818
Working voltage: DC5V
Product size: 27*48.5*4.5mm (excluding pin header)
Product application: This module can be widely used in various IoT applications, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It adopts DIP package and can be used directly by plugging in the bottom plate.
Product name: ESP32-CAM-CH340 camera module
Product model: HW-818
Working voltage: DC5V
Product size: 27*48.5*4.5mm (excluding pin header)
Product application: This module can be widely used in various IoT applications, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It adopts DIP package and can be used directly by plugging in the bottom plate.
| Format/Size | QQVGA | QVGA | VGA | SVGA |
| JPEG | 6 | 7 | 7 | 8 |
| BMP | 9 | 9 | / | / |
| GRAYSCALE | 9 | 8 | / | / |
Introduction (two)
Program download
1. Download the software and set it up, select the program or burn the file
2. The module presses the FLASH button (to keep pressing), and then connect the module through the USB cable
MICROUSB port and computer USB port.
3. To download the software, select the correct download port and download it. When the program starts to download, you can release the FLASH button
Program download
1. Download the software and set it up, select the program or burn the file
2. The module presses the FLASH button (to keep pressing), and then connect the module through the USB cable
MICROUSB port and computer USB port.
3. To download the software, select the correct download port and download it. When the program starts to download, you can release the FLASH button
ESP32-CAM Development Board
Features:
Low-power dual-core 32-bit CPU for application processors.
Main frequency up to 240MHz, computing power up to 600 DMIPS.
Built-in 520 KB SRAM, external 4M PSRAM.
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
Support OV2640 and OV7670 cameras, built-in flash.
Support image WiFi upload.
Support TF card.
Support multiple sleep modes.
Embedded Lwip and Free RTOS.
Support STA/AP/STA+AP working mode.
Support Smart Config/AirKiss one-click distribution network.
Support secondary development.
Specification:
Voltage: 5V
Current: 2A
Dimensions: 2.7x4cm/1.06x1.57inch
Color: As shown
Quantity: 1Pc
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1 x Development Board
Low-power dual-core 32-bit CPU for application processors.
Main frequency up to 240MHz, computing power up to 600 DMIPS.
Built-in 520 KB SRAM, external 4M PSRAM.
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
Support OV2640 and OV7670 cameras, built-in flash.
Support image WiFi upload.
Support TF card.
Support multiple sleep modes.
Embedded Lwip and Free RTOS.
Support STA/AP/STA+AP working mode.
Support Smart Config/AirKiss one-click distribution network.
Support secondary development.
Specification:
Voltage: 5V
Current: 2A
Dimensions: 2.7x4cm/1.06x1.57inch
Color: As shown
Quantity: 1Pc
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1 x Development Board
ESP32-CAM-MB+OV2640 Camera
Introduction：
The ESP32-CAM-MB module is a small camera module with a size of 39.8*27*. This module can work independently as the smallest system. A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz. Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
Basic performance parameters
1. Use low-power dual-core 32-bit CPU, which can be used as an application processor.
2. The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS
3. Built-in 520 KB SRAM, external 8MB PSRAM
4. Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces
5. Support OV2640 and OV7670 cameras, built-in flash
6. Support picture WiFI upload
7. Support TF card
8. Support multiple sleep modes.
9. Embedded Lwip and FreeRTOS
10. Support STA/AP/STA+AP working mode
11. Support Smart Config/AirKiss one-click network configuration
12. Support secondary development
Application scenarios
1. Home smart device image transmission
2. Wireless monitoring
3. Smart agriculture
4. QR wireless recognition
5. Wireless positioning system signal
6. And other IoT applications
|
Parameter |
Description |
|
Working Voltage |
4.75-5.25V |
|
SPIFlash |
Default 32Mbit |
|
RAM |
Internal 520KB+ 8MB PSRAM |
|
Wi-Fi |
802.11b/g/n/e/i |
|
Bluetooth |
Bluetooth 4.2BR/EDR and BLE standard |
|
Supported interface
（2Mbps）
|
UART、SPI、I2C、PWM |
|
Support interface
TF Card
|
Max. 4G |
|
IO Port |
9 |
|
Serial port rate |
Default 115200bps |
|
Spectrum range |
2400-2483.5MHz |
|
Antenna form |
Onboard PCB Antenna , Antenna Gain 2dBi |
|
Image output format |
JPEG(Only OV2640 Support),BMP,GRAYSCALE |
|
Packaging method |
DIP-16 |
|
Transmit power |
802.11b:17±2dBm (@11Mbps) 802.11g:14±2dBm (@54Mbps) 802.11n:13±2dBm (@MCS7) |
|
Receiving sensitivity |
CCK,1Mbps:-90dBm CCK,11Mbps:-85dBm 6Mbps(1/2BPSK):-88dBm 54Mbps(3/464-QAM):-70dBm MCS7(65Mbps,72.2Mbps):-67dBm |
|
Power consumption |
Turn off the flash:180mA@5V Turn on the flash and adjust the brightness to maximum:310mA@5V Deep-sleep:Minimum 6mA@5V Moderm-sleep:Minimum 20mA@5V Light-sleep:Minimum 6.7mA@5V |
|
Safety |
WPA/WPA2/WPA2-Enterprise/WPS |
|
Operating temperature |
-20 ℃~ 70 ℃ |
|
Storage environment |
-40 ℃~ 125 ℃, < 90%RH |
|
weight |
10g |
Package Include:1x ESP32-CAM-MB 5V WIFI Bluetooth Development Board USB CH340G
OV2640 Camera
Feature:
The OV2640 image sensor features 2 megapixels (1632x1232 pixels)
Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor.
Through the SCCB control, you can output the entire frame, sub-sampling, take the window, and a variety of resolution 10-bit sampling data.
The product UXGA images up to 15 frames per second.
The user can fully control the image quality, data format and transmission mode.
Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor.
Through the SCCB control, you can output the entire frame, sub-sampling, take the window, and a variety of resolution 10-bit sampling data.
The product UXGA images up to 15 frames per second.
The user can fully control the image quality, data format and transmission mode.
Specification:
High sensitivity for low-light applications
Low voltage for embedded applications
Standard SCCB interface, compatible with I2C interface
RawRGB, RGB (GRB4: 2: 2, RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output format
Supports UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40x30 size
Supports VarioPixel sub sampling mode
Automatic impact control functions include: automatic exposure control, Automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
ISP with noise cancellation and dead pixel compensation
Support image scaling
Lens loss compensation
Saturation automatic adjustment
Edge enhancement automatic adjustment
Noise reduction automatic adjustment
Sensing array: 1632x1232
Maximum format: UXGA IO
Voltage: 1.7V -3.3V
Analog voltage: 2.5 -3.0V (internal LDO to power supply 1.2V)
Power consumption TBD sleep: <20μA
Temperature operation: -30°C to 70°C
Stable working: 0°C to 50°C
Output format (8-bit)
YUV / YCbCr4: 2: 2 RGB565 / 555/444
GRB4: 2: 2 Raw RGB Data
Optical size: 1/4"
Viewing angle: 25 Degree
Maximum rate: 15fps
SXGA sensitivity: 1.3V / (Lux-sec )
Signal to noise ratio: 40dB
Dynamic range: 50 dB
View mode Progressive electron exposure 1 line to 1247 lines
Pixel area: 2.2 μm x 2.2 μm
Dark current: 15 mV/s at 60°C
Package Included:
1 x OV2640 2.0 MP Mega Pixels 1/4'' CMOS Image Sensor SCCB Interface Camera Module
High sensitivity for low-light applications
Low voltage for embedded applications
Standard SCCB interface, compatible with I2C interface
RawRGB, RGB (GRB4: 2: 2, RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output format
Supports UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40x30 size
Supports VarioPixel sub sampling mode
Automatic impact control functions include: automatic exposure control, Automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
ISP with noise cancellation and dead pixel compensation
Support image scaling
Lens loss compensation
Saturation automatic adjustment
Edge enhancement automatic adjustment
Noise reduction automatic adjustment
Sensing array: 1632x1232
Maximum format: UXGA IO
Voltage: 1.7V -3.3V
Analog voltage: 2.5 -3.0V (internal LDO to power supply 1.2V)
Power consumption TBD sleep: <20μA
Temperature operation: -30°C to 70°C
Stable working: 0°C to 50°C
Output format (8-bit)
YUV / YCbCr4: 2: 2 RGB565 / 555/444
GRB4: 2: 2 Raw RGB Data
Optical size: 1/4"
Viewing angle: 25 Degree
Maximum rate: 15fps
SXGA sensitivity: 1.3V / (Lux-sec )
Signal to noise ratio: 40dB
Dynamic range: 50 dB
View mode Progressive electron exposure 1 line to 1247 lines
Pixel area: 2.2 μm x 2.2 μm
Dark current: 15 mV/s at 60°C
Package Included:
1 x OV2640 2.0 MP Mega Pixels 1/4'' CMOS Image Sensor SCCB Interface Camera Module
2.4G Antenna
Description:
Frequency:2.4Ghz
Gains: 3dbi
Cable type:1.13 cable
Cable Length: 5.5cm
Total Length: 23cm
Body Material: Brass
Connector:Ufl/Ipx connector
Condition:New,Brand new,100% unused.
Package Included:
1x 2.4GHz WIFI Antenna 3dbi Ufl IPX Connector Aerial 29cm Cable HLK-RM04 ESP-07
ESP32-CAM module
Introduction (1)
ESP32-CAM-Integrated CH340 WIFI Bluetooth development board OV2640 camera module Support manual and automatic download MICRO USB interface USB to serial port CH340
Product name: ESP32-CAM-CH340 camera module
Product model: HW-818
Working voltage: DC5V
Product size: 27*48.5*4.5mm (excluding pin header)
Product application: This module can be widely used in various IoT applications, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It adopts DIP package and can be used directly by plugging in the bottom plate.
Product name: ESP32-CAM-CH340 camera module
Product model: HW-818
Working voltage: DC5V
Product size: 27*48.5*4.5mm (excluding pin header)
Product application: This module can be widely used in various IoT applications, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It adopts DIP package and can be used directly by plugging in the bottom plate.
| Format/Size | QQVGA | QVGA | VGA | SVGA |
| JPEG | 6 | 7 | 7 | 8 |
| BMP | 9 | 9 | / | / |
| GRAYSCALE | 9 | 8 | / | / |
Introduction (two)
Program download
1. Download the software and set it up, select the program or burn the file
2. The module presses the FLASH button (to keep pressing), and then connect the module through the USB cable
MICROUSB port and computer USB port.
3. To download the software, select the correct download port and download it. When the program starts to download, you can release the FLASH button
Program download
1. Download the software and set it up, select the program or burn the file
2. The module presses the FLASH button (to keep pressing), and then connect the module through the USB cable
MICROUSB port and computer USB port.
3. To download the software, select the correct download port and download it. When the program starts to download, you can release the FLASH button
On 08-May-2024 at 08:46:27 BST, seller added the following information: