ÄLMAREN faucet in stainless steel helps lower water- and energy-use – so you can lower your bills too. The high spout is practical for cleaning big pots and the quality is guaranteed to outlast many years of washing and rinsing.
Product details
10-year Limited Warranty. Read about the terms in the Limited Warranty brochure.
The high spout makes it easier to wash dishes, including large pots.
The faucet insert has hard, durable ceramic discs that can handle the high friction that occurs when you change the temperature of the water.
Designer
Brickstad/Palleschitz/Petersén
If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.
To be mounted in a 1⅜" hole in a max. 2" thick sink/countertop.
To make a hole for the kitchen faucet, FIXA 2-piece tool set can be recommended; sold separately.
Water and energy saving aerator (1.5 gal/min.) for high-pressure systems included.
Connection hoses with 9/16" connection included. Length: 13¾".
A tool is included that makes it easy to install the faucet in place.
Flow rate: 1.5 gpm which equals 5.7 l/minute.
Max. temperature hot water connection 80°C/176°F. Recommended temperature is 65°C/149°F.
Spare parts are available to prolong the life of your product. For more information, contact IKEA Customer Services at your IKEA store or IKEA.com.
Swivel spout is preset to 360° but can be changed to 120°.
Material
Spout:
Brass, Metallized
Body:
Zinc, Metallized
Care
Do not use scouring-powder, steel wool, hard or sharp tools which can scratch the surface.
Wipe clean with a soft cloth dampened with water and a mild dish detergent or soap, if necessary.
Wipe dry with a clean cloth.
Tested and certified according to applicable codes and standards including: ASME A112.18.1/CSA B125.1, NSF 61 and NSF 372.
This tap is for use on high pressure water systems. Tested to work with a max. pressure of 10 bar (1000 kPa). Recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).
| |
- Applicable product standards
| - ASME A112.18.1/CSA B125.1, NSF 61, NSF 37, EPA WaterSense
|
| |
| |
- Tested up to a max. static pressure
| |
| |
- Recommended working pressure
| |
- Max. hot water temperature
| |
- Recommended hot water temperature
| |
- Recommended cold water temperature
| |
| |
| |
| |
- Mounting hole measurement
| |
| |