Technical parameters and component name
Coating precision:0.001mm(line of sight stick precision)
Coating speed:0~1.2m/min(infinitely variable)
Effective coating size: 300*390mm
Coating stick material: stainless steel, length 40cm
Machine weight: about 20Kg
Power supply:110-220V
Frequency:50-60Hz
Machine volume:610*420*250mm
Machine power:48W

I. Overview:

Laboratory coating machine is an emerging laboratory instrument developed in recent years, it is the successful innovation of the organic combination of electrical control and mechanical, in the field of coating production it can save a lot of raw materials, improve the production process technology; the key is to greatly improve the reproducibility of coating on the basis of the experiment.
In the past, most of the general coating experiments using manual coating, coating is not uniform, and the overall effect is poor. In order to solve these problems experimental coating machine was born, its emergence can be said to be the icing on the cake for the booming coating industry.
AFA-IV automatic coating machine is designed to enable the experimenter to conveniently apply accurate coating film on different substrates and to reduce or eliminate the errors caused by human factors such as different coating speeds and applied pressures during the coating process. This machine adopts an infinitely variable motor to precisely control the coating rate, which can automatically complete the coating movement of wet film on different substrates and greatly improve the reproducibility of the coated film.

It is mainly used for adhesive, paper, film production test, but also can be used for other related coating, coating industry.

Second, the main technical parameters:

1、Main material: stainless steel

2、Motor power: 48W 220V 50Hz

3, coating base size: 570 mm × 360 mm

4、Effective coating film size: 430 mm × 300 mm (length × width)

5, coating thickness specifications: 12, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120, 150, 200 μm (according to the film thickness of the special wire rod to determine the wire rod is optional)

6, coating rod specifications: 12mm diameter and 400mm long (or special customized)

7, coating rate: 0 ~ 2cm / s infinitely variable speed

8, external dimensions: 570 × 370 × 140 mm (L × W × H)

9、Weight: about 20Kg

Third, the main features:

Coating system mainly consists of speed control motor, imported screw, imported sliding shaft, handle, domestic (

The coating system is mainly composed of speed control motor, imported screw, imported sliding shaft, handle, domestic (mouth) wire rod and other institutions. The coating thickness is adjusted by replacing the wire rod, and the speed knob sets the coating speed.

cloth speed, uniform coating.

Installation:

This machine is desktop, no special installation, when used flat on the workbench or office desk that is

It must be placed smoothly to avoid vibration during operation, which may affect the quality of coating.

V. Use and maintenance:

1、Please insert the plug completely into the jack, turn on the power, turn on the power switch.

2, the substrate to be coated (such as: black and white paper) laid flat on the coating base, clamped with clamps.

The motion to use a flat coating base material, and at the bottom with transparent tape fixed, so as to avoid to be coated base

Coating process sliding, resulting in coating failure.

3、Choose the appropriate coating thickness of the wire rod, snap into the wire rod snap, press the pressure balance lever.

4、Adjust the speed knob to select the appropriate coating speed.