Constant speed ratio, Efficient operation, High load capacity, Transmission without delay, Not easy to jump gears, Not easy to slip gears, Can be high load, high torque transmission
It has good resistance to damage, wear resistance, long life and high hardness,Smooth transmission.
Widely used in chemical machinery transmission, textile machinery, escalators, wood processing, garages, agricultural machinery, food processing, instrumentation, petroleum, bicycle, motorcycle and other industries.
Spiral Bevel gear set consisting of two gears (one left-handed and one right-handed). You will receive 2 gear wheels in the right combination for the correct transmission ratio. For the 1:1 ratio, this consists of two spiral bevel gears with the same module and number of teeth (one left-handed and one right-handed).
All purchased gears are delivered with grub screws .
● Standard Part
● Material: Medium Carbon Steel C45 ( DIN 1.0503,AISI/SAE 1045,JIS S45C)
● Surface Finish: Hardening (High frequency quenching) & Black Oxide
● Tooth surface Hardness: Hard (>350HBW)
● Gear Ratio: 1:1
● Spiral Angle:35 degrees
● Pressure Angle: 20 degrees
● Engagement angle: 90 degrees
● Gear Module (M) = 1
- Pitch (P) = 3.14mm
- Diametral Pitch (DP) = 1 inch (25.4mm)