we have lots of items in stock,if you need more items,please contact us
1.AD9833 DDS Signal Generator(Green)
 
Application:

Frequency excitation / waveform generation. Liquid, gas flow measurement.
Sensing applications - approximation, sports, defect detection.
Linear loss, linear decay.
Test equipment, medical equipment
Scan clock generator

Module Features:

100% Brand New

the working voltage: 2.3V-5.5V.

the working temperature range: -40 ~ + 105 ℃ prefix = o

onboard 25MHZ (accuracy of 50ppm) active crystal, stepping accuracy 0.1HZ.

on-board high-speed amplifiers 300M and also has a low-pass filtering.

two-channel output signal, an original signal output, an amplified output signal 5 times, 50Ohm output impedance.

very small size: 32mm X 32mm.

support universal plate (tunnel plate), a multiple-board pins are 2.54mm, can be easily welded universal board.

distribution STM32, STM8, STC and other common microcontroller debugged program and relevant information.

 
Package Contents


1PCS AD9833 DDS Signal Generator Module
 
2.  AD9833 Signal Generator(Purple)
 
Specification:

Working voltage: 2.3V-5.5V.
Working temperature range: -40 ~ + 105 ℃
Onboard 25MHZ (accuracy of 50ppm) active crystal, stepping accuracy 0.1HZ.
On-board high-speed amplifiers 300M and also has a low-pass filtering.
Two-channel output signal, an original signal output, an amplified output signal 5 times, 50Ohm output impedance.
Support universal plate (tunnel plate), a multiple-board pins are 2.54mm, can be easily welded universal board.
Distribution STM32, STM8, STC and other common microcontroller debugged program and relevant information.
Size:Approx.24mmX20mm
Material:Metal & Plastic

Package Included:

 1 x Module
 
3. AD9833 DDS Signal Generator(Blue)
 
Features:

    Digitally programmable frequency and phase
    12.65 mW power consumption at 3 V
    0 MHz to 12.5 MHz output frequency range
    28-bit resolution: 0.1 Hz at 25 MHz reference clock
    Sinusoidal, triangular, and square wave outputs
    2.3 V to 5.5 V power supply
    No external components required
    3-wire SPI interface
    Extended temperature range: −40°C to +105°C
    Power-down option                                                          
    Update Rate: 25(max)
    VOUT Maximum: 0.65V
    VOUT Minimum: 38mV
    VOUT Temperature Coefficient: 200℃
    Input High Voltage: 1.7-2.8V
    Input Low Voltage: 0.5-0.7V
    Input Current: 10µA
    Input Capacitance: 3pF
    Operating temperature range is −40°C to +105°C; typical specifications are at 25°C
    Size: 17*12mm/0.66*0.47"
    Quantity: 1pc

Package included:

    1 x Signal Generator Module
 

EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

We are professional Business & Industrial DIY Module part store. Follow and save our store,We will provide the best service and high quality-low price items for you.Save more