Wheel Spacer Specs:
Quantity: 4pcs
Thickness: 1.5 inch / 38mm
Vehicle Bolt Pattern: 5x5.5 inch/ 5x139.7mm
Wheel Bolt Pattern: 5x5.5 inch/ 5x139.7mm
Thread Size: 9/16"x18
Center Bore: 3.06 inch / 77.8mm
HuB Centric: Yes
Package List:
4Pcs Wheel Spacers Adapters
Installation Steps:
Step 1:
• Following your vehicle owner's manual, proper raise the vehicle and support it using adequately load-rated jackstands.
• Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, don't continue with this installation.
• Remove any wheel visible rust from the mating flange on the vehicle's rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstruction which could prevent proper seating of the spacer/adapter.
Step 2:
• If proper seating can be achieved, apply provided thread locker to vehicle's studs and mount the wheel spacers on to rotor by torquing provided wheel spacers/adapter lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
• Install wheel on to wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
• DO NOT USE AN IMPACT WRENCH.
Step 3:
• Check that wheel and tire clearance allow for full steering(lock-to-lock).
• If there is no interference, vehicle may be lowered.
• Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles.
What Do Wheel Spacers Do?
• Avoid Side Roll-over: Wheel spacers can help to reduce side roll-over due to an increase in resistance, especially when you are turning very fast, so as to ensure driving safety.
• Provide Better Traction: After installing our wheel spacers, you can enjoy better traction when driving, so they will greatly improve your driving experience.
• Widern Tire Spacing: After the tire spacing is widened, you can enjoy more room for modification on your cars performance and looking, such as installing a larger wheel.