Citroen 2CV (or similar) Solex 26/35 (18/26) carburettor.
This carburettor has been stripped and rebuilt with the addition of precision fitted phosphor bronze bushes fitted into the carb body to address problems caused by wear by the throttle spindle (generic photo of one of the two fitted bushes). When worn, the carb will cease functioning correctly as air will be pulled through at this point affecting the fuel / air mix to the engine. By addressing this problem, the carb is returned to original tolerances.

All alloy parts have been vapour blasted and ultrasonically cleaned, all steel parts have been re-plated to the original bright zinc/yellow passivate finish.
The base of the carb has been honed flat to regain a good gasket seal.

The carb has been fiited with a 107 primary venturi jet and 90 secondary for added performance. New diaphragm, choke butterfly, 'O' ring, springs, gasket and new choke pull-off device also fitted.

Once assembled, the carb has been fitted to my car, adjusted and tested for 90 miles. Idle speed set to 800rpm.
The carburettor is therefore set up and just needs fitting.

All photos are of the carburettor you will get, except for a generic photo of one of  the throttle spindle bushes.

Postage is £15.40 with Royal Mail / Parcelforce. This is the only delivery service I trust (after a bad experience with another) and is next day (except weekend, or after last collection), trackable delivery. This price is for GB only. Contact me to see if delivery is possible elsewhere.
Alternatively, if you live nearby and would like to collect, I will fit it to your car for free.
Fitting is easy if you have the cranked spanner for the carb to manifold nuts!
Feel free to message me should you have any questions.