Automatic Counting Machine SMT SMD Parts Component Counter +Leak-detection 110V
110V Automatic SMD Parts Component Counter Counting Machine
 | The SMD material belt type components are all suitable,Diameter of belt wheel:Any size fits,PITCH:1,2,4,8,10,12,16,24,32,44,56mm,WIDTH:4,6,8,12,16,24,32,44,56mm (note: smaller or wider distance can be developed or customized according to demand)
|
 |  |  |
| Completely automatic way computation components quantity,facilitates a material,sends the material work simplicity of operator. | The SMD counter adopts the principle of photoelectric sensing,and uses the corresponding relation between the guide hole and the part,Has a special inventive mind against material belt will fall off the design to reduce to the material belt’s injury to the smallest | May install the scanning gun and the bar code printer,facilitates the management work. get the data more quick and convenience.can realize the convenient and quick count,is the high efficiency auxiliary equipment of SMT material management. |
Note- After unpacking, please check if all the attachments are complete. - Please read the operation manual carefully before using and keep it properly. - Check whether the voltage specification is consistent with that of municipal power. - Please make sure to connect the ground wire to ensure the safety of the person and parts. |  |
Operation methods
| 1) | connect the power cord to the host and connect the AC220V power supply |
| 2) | turn on the POWER switch of the machine panel, and the LCD panel will shine |
| 3) | press PITCH to set the spacing of parts to be counted and press "ENTER". Place the parts to count on the left side tray. |
| 4) | manually pull out the material belt and clamp it between the material plate and counting gear, and align the intermediate hole of the first part and blank space to the middle line of the material plate. |
| 5) | press the "stop/reset" button for 2 seconds to return the number to zero. Note: when pulling the material belt, the counting gear will rotate and count. |
| 6) | press the "setting" button to switch to manual and automatic mode. If you choose automatic mode, you must input the quantity you want to count. Otherwise, press "forward" and the motor will not rotate. |
| 7) | pull the material belt by hand and wind it to the empty material plate. Press "forward /RIGHT" to count. |
| 8) | the motor will stop when the quantity arrives. Due to the inertia principle, the number of counts may be more or less than the set value of about 1,which can be manually rotated to the LCD display set value in the direction of the material disk,that is, the number of parts |
| 9) | after counting, press "reverse /LEFT"tape and then roll it back to the original LEFT panel, and then stop rotating |
Description:
The SMD counter adopts the principle of photoelectric sensing,and uses the corresponding relation between the guide hole and the part,through the special-purpose processing chip and the large-scale centralized circuit processing,realizes the zero error,accurately measures the number of SMD parts,can realize the convenient and quick count,is the high efficiency auxiliary equipment of SMT material management.
Specification:
Power supply: AC110V,60HZ
Power:25W
Counting range: -99999- 99999PCS
Outlook size: L470*W300*H180mm
Weight:10 kg
Application:
The SMD material belt type components are all suitable
Diameter of belt wheel:Any size is all suitable
PITCH: 1,2,4,8,10,12,16,24,32,44,56 mm
WIDTH: 4,6,8,12,16,24,32,44,56mm (note: smaller or wider distance can be developed or customized according to demand)
Features:
Completely automatic way computation components quantity,facilitates a material,sends the material work simplicity of operator.
Has a special inventive mind against material belt will fall off the design to reduce to the material belt’s injury to the smallest
Forward and reverse all may count,but preinstall quantity,will calculate quantity precisely,zero error.
May install the scanning gun and the bar code printer,facilitates the management work.
Note:
After unpacking, please check if all the attachments are complete.
Please read the operation manual carefully before using and keep it properly.
Check whether the voltage specification is consistent with that of municipal power.
Please make sure to connect the ground wire to ensure the safety of the person and parts.
Operation methods:
1) connect the power cord to the host and connect the AC220V power supply
2) turn on the POWER switch of the machine panel, and the LCD panel will shine
3) press PITCH to set the spacing of parts to be counted and press "ENTER". Place the parts to count on the left side tray.
4) manually pull out the material belt and clamp it between the material plate and counting gear, and align the intermediate hole of the first part and blank space to the middle line of the material plate.
5) press the "stop/reset" button for 2 seconds to return the number to zero. Note: when pulling the material belt, the counting gear will rotate and count.
6) press the "setting" button to switch to manual and automatic mode. If you choose automatic mode, you must input the quantity you want to count. Otherwise, press "forward" and the motor will not rotate.
7) pull the material belt by hand and wind it to the empty material plate. Press "forward /RIGHT" to count.
8) the motor will stop when the quantity arrives. Due to the inertia principle, the number of counts may be more or less than the set value of about 1, which can be manually rotated to the LCD display set value in the direction of the material disk, that is, the number of parts.
9) after counting, press "reverse /LEFT" tape and then roll it back to the original LEFT panel, and then stop rotating.
Packages:
1 x SMT/SMD Components Counter
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
2-9 working days to: USA
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
