Uncompressed DVI Single Core Fiber Optic Extender Multimode 300M LC 1080P

Characteristic:

Extend DVI (Digital Video Interface) Compatible Devices to 300 m

Supporting video resolution up to 1920 *1200@60Hz

The transmission distance of single-core optical fibers can reach 300 m (OM3) of multi-mode.

Supporting HDCP Content Protection Protocol and HDCP Optical Link Transmission

RGB video signal clock recorder, non-TMDS extension

EDID automatic learning to meet the needs of video display and plug-and-play

No EMI electromagnetic interference, no lightning surge worries

Applicable to various types of single core multimode LC connector fibers

Support for DDWG (Digital Display Working Group) DVI Compatible Display

Included in the packing box

(1) ZH-THF6000 TX sender

(2) ZH-THF6000 RX Receiver

(3) 5V AC/DC power adapter

(4) USB to Micro-USB power cord

System Connection Diagram

1. Connect the ZH-THF6000 TX transmitter directly to the DVI interface of the video source device. If the video source device is HDMI output, the DVI-HDMI adapter can be used to connect the HDMI interface (ZH-THF6000 supports HDMI EDID, HDCP, and embedded audio).

2. If DVI video source equipment can provide a combined + 5V DC (500mA), then no external + 5V DC power supply is needed.

If the DVI video source cannot provide the shared + 5V DC power, the + 5V power adapter needs to be connected to the zh-thf6000 TX transmitter through the USB power cable.

3. Connect the ZH-THF6000 RX receiver directly to the DVI interface of HD display. If the monitor is an HDMI input, you can use it

DVI-HDMI adapter connects HDMI interface.

4. Connect the + 5V power adapter to the ZH-THF6000 RX receiver through the USB power cord.

5. Connect LC connector multimode optical fiber (OM3) to FO6000 TX transmitter and RX receiver.

6. When all connections are completed, the blue LED lights on TX and RX will remain constant (rather than flash).