Remember my motors are all NAME BRAND stepper motors made for heavy industry,

NOT the cheap non-name brand motors made for retail, those stepper motors heat up, make lots of noise and don’t last. 

NEW Nema 17 stepper motors for your DIY RepRap Markerbot Repstap CNC Router projects.

Astrosys Stepper

Minebea-Matsushita Co. LTD.

• Holding Torque: 0.537Nm - 5472 g/cm - 76 oz/in
• Rated Current/Winding: up to 1.4A
• Supply Voltage: up to 36VDC
•  Resistance Per Phase:  2.3Ω
• 1.8 deg / step
• 4 wire connection bi-polar
• width  42mm x 42mm
• total length of 44mm
  
• 5 mm diameter shaft WITH FLAT
  
• shaft length 30mm
  
• Weight 11.3 oz. 
  
• Connection wire provided
  
• PIN1= B-
• PIN3= B
• PIN4= A
• PIN6= A-
•