Watch the product video here:
HTTPS://www.youtube.com/watch?v=o82buWfITPI&feature=youtu.beDescription:
This USB/Wireless Relay Module allows computer control switching of external devices by using the USB port of your computer!
It also has a wireless extension port, can work with XBEE or Bluetooth Bee or Wifly Module, which mean also you can control your device by zigbee or Bluetooth or WiFi!
The TOSR04 module can powered by USB bus or DC power and provides four volt free contact relay outputs with a current rating of up to 10 Amp each.
External power voltage should be 5v
If you use DC Power ,the Input voltage should be DC5V.
Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.
A full datasheet for the relays used on the TOSR04 is here: G5LA datasheet
First Step - Install the Driver
The TOSR04 module uses FT232RL USB to UART chip . Before using the TOSR04 you will need to download the FT232RL Driver.
Connect the TOSR04 and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.
The TOSR04 will now appear as a com port.
Commands
The TOSR04 operates with an easy to use command set as described in the table below.
TOSR04 Baud rate : 9600
Test program and example source code
To get the TOSR04 up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.
Documents:
Controlling a TOSR0x USB Relay Module Using Python (Thanks James!)
Find out which kind of relay you need here:
TinySine Relay Module List (copy the URL and paste to your web browser):
HTTPS://www.tinyosshop.com/download/Relay%20Module%20Series.pdf