Add intermittent wipers to your GM vehicle from the 60's and 70's.

Converts your factory two-speed non-hiding wipers to have three delay speeds in addition to the factory slow and fast speeds.  You must have the two-speed wipers (both the motor and the switch) and they can not be the hiding style (some cars had a feature where the wipers would drop down to a lower position when turned off - this module won't work with that style of wiper.)  Must be a GM brand vehicle.  Will work with or without the optional washer.

The internal software monitors the switch to determine if the wiper speed needs to change.  Much like paddle shifters can be used to sequence an automatic transmission up or down the gears, the stock switch tells the software to increase or decrease the current setting.  Move the switch briefly to the fast position and then back to the middle will shorten the delay one notch.  Moving the switch briefly to the off position and back to the middle will lengthen the delay one notch.  There are six possible states: off, once every 8 seconds, once every 5 seconds, once every 3 seconds, continuous slow, and continuous fast.  Use the stock switch as previously described to sequence through the possible states.  Leave the switch in the fast position to instantly move to the stock fast speed.  Leave the switch in the off position to immediately go to the off state.  

Utilizes the stock switch for a completely stock appearance.  Installs behind the dash between the switch and harness.  You will need to remove the switch from the dash so you can get to the connections.  You will need to follow the directions to determine which terminal performs each function and make the necessary connections.  You will also need a source for switched power and a good ground connection.  All necessary hardware included.

Visit revolutionelectronics.com for more details and to download the instructions.

2" x 3" x 1" high.  
Fully potted (so it is water resistant)
can be mounted in any orientation
Internal 7A circuit breaker (self resetting type)
Simple installation
Weighs only 7 oz.  Shipping weight less than 1 lb.
Made in USA

Some of the many applications this will fit:
'68-'72 Chevy Truck
'68-'72 Chevelle
'63-'69 Corvair
'63-'74 Chevy II - Nova
'67-'69 Camaro
'64-'66 GTO
'63 Chevy Truck
'64 Chevelle
'64 Skylark