Technics1200s
"Your have the best... Treat it that way"
|
This auction is for 1 Pair (Left & Right Channel) of Professional Performance RCA cables with Neutrik / Rean 24k Gold connectors and "undetermined" ends.
(Without RCA Phono / RCA PCB).
(If you are looking for RCA's soldered to our Internal Ground RCA PCB see our other auction here).
Quantity 1 = Enough for one turntable.
Available Lengths = 3.0 feet - 6.0 feet
(Note: Original Stock Technics RCA Phono cables are 3.5 ft in length with 0.5ft internal. If you are looking for the exact length as the stock cables select 3.5 ft as the length).
This will fit the following models: Technics 1200 or 1210 MK2, M3D, MK3D, MK4, MK5, MK6, M5G, GLD, LTD.
8 Colors / Colours to select from!
8 Lengths to select from!
Several cables are simply to thick for the Technics 1200 / 1210. Thicker is not always best. What some do is remove the original spacer to fit these over sized cables leaving the clamper to take on all the stress. As we have seen over the years the clamper is not designed for this and with time gets weak causing the clamper to loosen leaving all the pressure on the tie strap and solder points.
Our Pro cables are the thickest while still respecting the original design.
Installation:
We have made it so the installation process is a smooth & simple procedure.
Tools Required: Phillips Screw Driver & Soldering Iron
Steps: Remove Rubber bottom cover, Remove RCA Clamper & Spacer, Remove Tone Arm Base Plate, Desolder Old RCA Cables & 5 tone arm wires from old PCB). Solder on your New Cables & apply tie strap. Solder 5 Tone Arm Wires to PCB and Put it back together. Your all done!
Neutrik Rean RCA connectors.
Globally known in the industry as the professional standard.
Value Added FREE!
Color Coded Heat Shrink around the end of the cables and barrel adding strength to the cables and avoiding damage from pulling the cable instead of the barrel when disconnecting RCA from unit.
Pre-tinned "Undetermined" Ends for Easy Soldering
|