|
(SCREENSHOTS)
|
-->Do you
want to learn how to run a lathe?
-->Are
you interesting in how to evaluate a used lathe for purchase?
-->Do you
want solid instructional videos as well as historical guides and
perspective?
If you
have any interest in operating a lathe, or buying a lathe, either from a
professional or amateur standpoint, then this collection is for you!
13 videos are included on
this disk, in .mp4 format that can be played on any computer.
These videos combined are over
10 hours long! You can save them to
your hard drive, and then place them on
your Ipad or tablet or phone, and watch them in your shop at your
convenience. They provide a great instruction on proper lathe and
milling techniques. Great tips
and tricks!
Advance Metal Lathe- Boring steady
rest facing - A basic
instructional video on boring with a metal lathe.
Basic Metal-Working Skills --
This 2 hour video is for the beginner. Learn basic techniques on
milling, drilling, cutting and basic machine shop usage.
Essential Machining Skills - Working with a Lathe -
This 2 hour professional video gives you a solid overview
or working with a lathe. Proper techniques are discussed, setup,
and maintenance.
Essential Machining Skills- Working with a Milling Machine -
This 3 and a half professional video
goes through a milling machine in the same detail as done previously for
a lathe, Learning all the secrets the pros use.
Evaluating and moving a used metalworking lathe -
This is a great 1 hour video
that is a must for anyone shopping for a used lathe. Learn how to
look at them and tell how used and abused they are and make a good
judgment call. Don't buy a lathe without watching this video
first.
How to Cut a Fine Thread on a Lathe (Training Film) -
Classic footage from industry
showing basic thread cutting.
How to machine a shaft at two different diameters -
Additional classic industrial training film
use to train new machine shop workers.
How to Shape Lathe Cutting Tools (Training Film) -
This interesting old time video tells you
how to make tools for your lathe.
Machining an Acme Thread (Training Video) -
A training film on the proper techniques
used for cutting threads.
Milling machine tutorial - cutter selection, speeds and feeds,
coolant, high speed machining -
This 30 minute video gives you an overview
of how to select the proper cutting tools for the right job.
Plain Turning on the Metal Working Lathe (Training Film) -
This training film for new workers talks
about turning on the metal lathe.
Southbend Metal Lathe (basic use) -
A 20 minute introductory training film on
teh Southbend metal lathe.
The Bible of Metal-Working with a Lathe! -
A classic introduction that everyone needs
for the metal working lathe.
We are not going to stop there. In addition to those videos, we
are also including over
145 books and projects to help you learn more about
working with lathes! Some of these are short reference guides, where as
some of them are full length books. They are provided here to help
you start building your reference library on your lathe.
Some of them are probably being the range of the average user, but they
are great set of reference material for the beginner or expert alike.
The follow topics are covered, just as an
example:
Types of Lathes
Engine Lathes
Lathe Components
Care
and Maintenance of Lathes
General Purpose Cutting Tools
Single Point
Tool Bits
Tool holders and Tool Posts
Work Holding Devices
Lathe
Attachments
Rests
Tools Necessary for Lathe Work
Cutting Fluids |
Laying
Out and Mounting Work
Methods of Mounting Work
Lathe Speeds
Feeds and Depth of Cuts
Micrometer Collars
Facing
Straight Turning
Machining Shoulders
Corners
Undercuts
Grooves and Parting
Radii and
from Turning |
Taper
Turning
Screw Thread cutting
Thread and Fit
Classifications
Thread Cutting Tool Bits
Thread Cutting Operations
Tapered Screw Threads
Measuring Extern V-Shaped Screw Threads
Cutting
Internal Threads
Cutting External ACME Threads
Cutting Square Threads
Knurling on the Lathe |
Drilling with the
Lathe
Boring with the
Lathe
Tapping and Hand Die Threading
Reaming on the Lathe
Filing and
Polishing on the Lathe
Eccentric work on the Lathe
Recessing Drilled
and Bored Holes
Lathe Tool Post Grinder
Milling on the Lathe
Using
Micrometer Carriage Stop
And so much more!!: |
Beginner Instruction:
Elementary Lathe
Practice, by T. J. Palmateer, 1917,
28 pages
Elementary Machine Shop Practice,
by J. A. Pratt, 1921, 327 pages
Elementary Machine Shop Practice,
by T. J. Palmateer, 1920, 124 pages
First Year Lathe Work - How to Build an 8'' Grinder,
by J.J. O'Brien, South Bend Lathe Words
Publication, 1920, 57 pages
First Year Lathe Work - How to Make an 8'' Inch Bench,
by J.J. O'Brien, South Bend Lathe Words
Publication, 1920, 60 pages
First Year Lathe Work - Introduction,
by J.J. O'Brien, South Bend Lathe Words
Publication, 1917, 63 pages
How to Run a Lathe for the Beginner,
by J.J. O'Brien, South Bend Lathe Words Publication, 1914, 66 pages
How to Run a Lathe or Instructions on How to Run a Lathe,
193 pages
Lathe & Planer Tools,
by W. J. Kaup, J. F. Sallows, 1912, 48 pages
Lathe Operations, US Army
Publication, 1988, 140 pages
Lathe Work - A Practical Treatise,
by Paul N. Hasluck, 1883, 220 pages
Lathe Work for Beginners,
by R. F. Yates, 1922, 239 pages
Intermediate and Advanced Instruction:
A Manual of the Hand Lathe - Origin &
Development, by Egbert P. Watson 1869,
138 pages
A Treatise on Lathes & Turning,
by W. H. Northcott, 2nd ed 1876, 356 pages
Hartness Flat Turret Lathe Manual,
by Jones & Lamson 1915, 175 pages
Hartness Flat Turret Lathe Manual,
by Jones & Lamson 1910, 212 pages
Lathe Bed Design, by Joseph G. Horner, 1913,
48 pages
Lathe Design for High & Low-Speed Steels,
by J. T. Nicolson, 1908, 438 pages
Lathe Design, Construction & Operation,
by O. Perrigo, 1919, 470 pages
Lathe Work, Drilling, etc,
ITC, 1901, 731 pages
Lathe Work, etc., by R. H. Smith, 1915,
557 pages
Lathe Work, Planer, Shaper, etc, ITC, 1903,
785 pages
Lathe Work, Working Drawings, etc., ITC, 1901,
540 pages
Lathes, Drills and Drilling, and other Machine Tools,
by Fred H. Colvin &, Frank A. Stanley, 1922,
348 pages
Lessons on the Speed Lathe,
by A. G. Compton & J. H. De Groodt, 1898,
157 pages
Metal Spinning, by C. Tuells & W. A. Painter, 2nd ed. 1912,
37 pages
Metal Spinning, by Fred D. Crawshaw, 1909,
72 pages
Modern American Lathe Practice,
by Oscar Perrigo, 1907, 432 pages
Practical Metal Turning, by Joseph G. Horner, 1906,
412 pages
The Complete Practical Machinist Embracing Lathe Work,
by Joshua Rose, 1876, 414 pages
The Lathe & Its Uses,
by James Lukin, 1898, 290 pages
The Lathe, by Henry D. Burghardt, 1919,
356 pages
The Metal Turner's Handybook,
by Paul N. Hasluck, 1906, 150 pages
The Screw-Cutting Lathe, by James F. Hobart, 1907,
175 pages
The Wood Turner's Handybook,
by Paul N. Hasluck, 6th ed., 1901, 152
pages
Turning & Boring, by Franklin D. Jones, 1915,
301 pages
Gearing, Teeth, and Bearings
A
New General Theory of the Teeth of Wheels,
by Edward Sang, 1852, 190 pages
A Practical Treatise on the Teeth of Wheels,
by S. W. Robinson, 1876, 133 pages
A Treatise on Gear Wheels,
by George B. Grant, 9th ed., 1904, 108 pages
American Machinist Gear Book,
by Charles H. Logue, 3rd ed., 1922, 364
pages
Ball Bearings, by A.
Golden, 1910, 31 pages
Bearings & Their Lubrication,
by L. P. Alford, 1911, 233 pages
Bearings, by F. E. Cardullo,
E. Kistinger & C. H. Benjamin, 1908, 39 pages
Bevel Gearing, by Ralph E.
Flanders, 1909, 48 pages
Bevel Gears, by John W.
Newall, 1891, 51 pages
Bevel, Spiral & Worm Gearing,
Machinery's Data Sheet Series, 1910, 32
pages
Formulas in Gearing, Brown
& Sharpe Mfg. Co., 5th ed., 1907, 185 pages
Gear Cutting in Theory & Practice,
by J. G. Horner, 1918, 401 pages
Gear-Cutting Machinery, by
Ralph E. Flanders, 1909, 328 pages
Handbook on the Teeth of Gears,
by George B. Brant, 4th ed., 1890, 68
pages
Hobs & Gear Hobbing, by
John Edgar, 1914, 48 pages
Practical Treatise on Gearing,
by Brown & Sharpe Mfg. Co., 1920, 213
pages
Spiral & Worm Gearing, by
Erik Oberg, 1920, 284 pages
Spiral Gearing, by Ralph E.
Flanders, F. G. Bostock, G. Muffly & G. W. Barley, 3rd rev. ed., 1912,
48 pages
Spur & Level Gearing, by
Erik Oberg, 1920, 319 pages
Spur Gearing, by A. B.
Babbit et al, 1908, 47 pages
Teeth of Wheels Applied to Millwork Machines,
by Robertson Buchanan, 1808, 188 pages
The Art of Generating Gear-Teeth,
by Howard A. Coombs, 1904, 150 pages
The Essentials of Gearing,
by Gardner C. Anthony, Revised ed., 1911, 139 pages
Toothed Gearing, by Howard
A. Coombs, 1912, 150 pages
Treatise on Toothed Gearing,
by J. Howard Cromwell, 4th ed., 1901, 273
pages
Worm & Spiral Gearing, by
Frederick A. Halsey, 1903 (diagrams missing), 110 pages
Worm Gearing, by Hugh K.
Thomas, 2nd ed., 1916, 110 pages
Worm Gearing, by Ralph E.
Flanders, J. Edgar & C. F. Blake, 4rd ed., 1910, 47 pages
Screw Making
Brown & Sharpe Mfg. Co. Machinery and
Tool Catalogue, 1904, 486
pages
Brown & Sharpe Mfg. Co. Machinery and Tool Catalogue, 1909,
135 pages
A Treatise on the Construction & Use of Universal Milling Machines,
Brown & Sharpe Co., 1882,
110 pages
Automatic Screw Machines & Their Tools,
by C. L. Goodrich & F. A. Stanley,
1909, 268 pages
Automatic Screw Machines,
by Douglas T. Hamilton & F. D. Jones, 1916,
352 pages
Care and Use of Automatic Gear Cutting Machines,
Brown & Sharpe, 69 pages
Cold-Heading,
by Chester L. Lucas, 1914,
43 pages
Machinery & Tools,
Brown and Sharpe, 1916, 344
pages
Practical Treatise on Gearing,
Brown and Sharpe Mfg, 1896,
192 pages
Practical Treatise on Gearing,
Brown and Sharpe Mfg, 1902,
184 pages
Practical Treatise on Milling & Milling Machines,
Brown & Sharpe Mfg,
1914, 344 pages
Screw Machine Kinks,
by F. H. Colvin & F. A. Stanley, 1908,
93 pages
Screw Thread Cutting,
by E. Oberg et al, 1909, 39
pages
Screw Thread Kinks,
by F. H. Colvin & F. A. Stanley, 1908,
114 pages
Screw Thread Production to Close Limits,
by Howard. E. Adt, 1920,
199 pages
Screw Thread Tools & Gages,
by Erik Oberg et al, 2nd rev. ed., 1910,
43 pages
Screws & Screw Making,
Britannia Co., 1891, 215
pages
Set-up and Operation of Automatic Screw Machines - No. 1,
1968, Brown & Sharpe Mfg,
15 pages
Set-up and Operation of Automatic Screw Machines - No. 2,
1968, Brown & Sharpe Mfg, 18 pages
Set-up and Operation of Automatic Screw Machines - No. 3,
1968, Brown & Sharpe Mfg, 11 pages
Set-up and Operation of Automatic Screw Machines - No. 4,
1968, Brown & Sharpe Mfg, 17 pages
Set-up and Operation of Automatic Screw Machines - No. 5,
1968, Brown & Sharpe Mfg, 12 pages
Set-up and Operation of Automatic Screw Machines - No. 6,
1968, Brown & Sharpe Mfg, 19 pages
Set-up and Operation of Automatic Screw Machines - No. 7,
1968, Brown & Sharpe Mfg, 16 pages
Set-up and Operation of Automatic Screw Machines - No. 8,
1968, Brown & Sharpe Mfg, 14 pages
Set-up and Operation of Automatic Screw Machines - No. 9,
1968, Brown & Sharpe Mfg, 13 pages
Set-up and Operation of Automatic Screw Machines - No. 10,
1968, Brown & Sharpe Mfg, 14 pages
Set-up and Operation of Automatic Screw Machines - No. 11,
1968, Brown & Sharpe Mfg, 18 pages
Set-up and Operation of Automatic Screw Machines - No. 12,
1968, Brown & Sharpe Mfg, 12 pages
Set-up and Operation of Automatic Screw Machines - No. 13,
1968, Brown & Sharpe Mfg, 11 pages
Set-up and Operation of Automatic Screw Machines - No. 14,
1968, Brown & Sharpe Mfg, 35 pages
The Calculation of Change-Wheels for Screw Cutting - A Practical Manual,
by D. de Vries, 1908, 92 pages
The Screw-Cutting Lathe,
by James F. Hobart, 1907,
175 pages
Thread Cutting Methods,
by Franklin D. Jones, 1918,
354 pages
Projects for your Lathe:
A 2 in Lathe You Can Build |
Foot Powered Scrollsaw |
A Centerpunch Grinding Post |
Freehand_Metal_Turning |
A Home Built Heat
Treatment |
Grinder |
A Modern Build of a Medieval Spring Pole Lathe |
Hand Operated Hole Punch |
A Portable Bench Sander |
Heavy Duty Grinder |
A Radial Drill Press Made From Spare Parts |
Homemade Bandsaw for your Workshop |
A Simple Lathe
Countershaft Unit |
How to Make an 8 inch Bench Lathe |
A Small Bench Grinder |
Make a 4 in Bench Slotter |
A Small Bench Miller |
Making a Boring Bar |
Ball Bearing Lathe Center |
Metal Bending Machine |
Basic Machines Training Course |
Metal Brake |
Bearings, Design and Instruction |
Metal Cutting Shears |
Bench Saw Table For A Wood Lathe |
Metal Shaper For Your Shop |
Boring In- The Lathe |
Metal Turning Lathe |
Boring Tools |
Pipe Bending Machine |
Build a 6 in Turret Lathe |
Shop Forge |
Build an Abrasive Cutoff Wheel |
Simple Decorative Lathe Work |
Chop Saw |
Slip Roll Machine |
Cutting Lubricants, Machinery's Reference Book |
Textbook of Advanced Machine Work |
Cutting Tool Applications |
The TextBook of Turning |
Cutting Tools Worked by Hand and Machine |
Treadle Powered Wood Lathe |
DIY Fly Cutter |
Using The DBit |
Flywheels, Machinery's Reference |
Welders Grill and Grinder |
Foot Operated Drill |
|
|
|