For sale here is our CostaCoat 16oz. Essentials KIT. (included in this Kit is listed below):
1= 16oz. (1 pint ) bottle of CostaCoat Wipe-On Clear Coat Sealer & Protectant
1= 16oz. (1 pint) bottle of CostaCoat Prep-Cleaner
1= Ultra Fine Grey Scrubbing Pad
1= Microfiber Applicator
This 16oz. kit should be enough product to finish a kayak, canoe, PWC, or small camper shell...Total coverage on average of about 40 sq. ft. at six (recommended) coats, for 16 oz. For other size KITs simply go to our eBay store or type in COSTACOAT in your general eBay search to find the appropriate KIT size (all KITs use the same formulation of clear coat).
Customer's Feedback Comments & Testimonials:
 | AMAZING is an understatement! MIND BLOWING RESULTS!!!!!!!!!! WOW |
| ALL I CAN SAY IS WOW!! IF YOU HAVE NOT TRIED THIS YOU NEED TOO!!! |
| 3rd time buying for new boat, produce is GREAT and seller is AWSOME!!! |
| There is no other product on the market like it (( amazing )) customer for life |
| AMAZING is an understatement! MIND BLOWING RESULTS!!!!!!!!!! WOW |
|
awesome product, works better than advertised!! THANK YOU!! |
|
THIS STUFF WORKS! Put on my old Bayliner and wow what a difference! |
|
impressed with product--thrilled with service--thanks--i'll be back aaaaa+++++ |
Great Product. Worked well on an older Toyota RV. Quality Seller. Thanks. A+ Excellent product, I would recommend this to anyone Great product and fast delivery thanx!!!!!!!!!!!!!!!!!!!!!!!!!!
Easy to apply...really works! Will reorder.
Beyond Belief! This product is amazing, and customer service is A++
This stuff really works!
Works great just as advertised , took 20 years off my old classic
made my 1999 RV look like a 2009. Great Product. Fast shipping. My 2nd. order
At CostaCoat-USA, all of our product line is centered around our CostaCoat Wipe-On Clear Coat and all of our feedback represents this product. It’s a great alternative to wax, and has been especially developed for aged surfaces that have oxidized or degraded with time.
CostaCoat Wipe-On Clear Coat Sealer & Protectant, will provide an ultra-high gloss after and lasting protection, without rubbing or buffing. Once your surface has been properly cleaned (using CostaCoat Prep-Cleaner as a wash, then rinsing well and then fully dry), simply wipe on four to six initial coats of CostaCoat Protectant, allowing it to dry between each coat. Once six to eight coats have been applied, you will have lasting protection and shine…At least once a season or every six to eight months, you will need to clean (washing using Dawn dish soap only, then rinsing well, then dry) the surface and apply two to three coats additional coats (in order to rejuvenate).…When maintained properly this clear coat should last a very long time. Should you ever need to remover our clear coat, we have a remover/stripper that will remove our finish (and if done as directed should not damage to your original base finish or original substrate).
Preparation is the key to our system. You will need to get the surface you are applying CostaCoat to very clean (washing well with our CostaCoat Prep-Cleaner, and rinsing well), as any dirt or contaminants present will be encapsulated behind the clear coat and can prevent good adhesion once the clear coat has been applied. The way your surface looks when it’s wiped with a damp towel is the color you will get once CostaCoat Protectant has been applied. In your preparation there is no need to buff or try to make your surface shine…You will simply treat your original surface as a basecoat for color and CostaCoat Protectant as a Clear Coat.
A pint kit (16oz.) should be enough product to complete a kayak, canoe, small boat, golf cart, sand car, cabinetry, or a couple of doors.
CostaCoat Wipe-On Clear Coat Sealer & Protectant was developed as protection and beauty enhancement for the harsh exterior environment of Boats and RV’s, yet will also work on the following, (properly prepared) surfaces:
· Fiberglass
· Carbon Fiber
· Gel Coat
· Epoxy Paints
· Acrylic Paints
· Urethane Paints
· Powder Coated Surfaces
· Corrugated Siding
· Polycarbonate
· ABS Plastics
· Styrene Plastics
· Laminate Surfaces
· Varnished or Sealed Wooden Surfaces
· EPDM Rubber
· Polycarbonate Plastics
· Vinyl Films (Body Wraps & Graphics)
Please note: We have other auctions here on eBay or in our CostaCoat eBay store, with different volumes and some KITs...If you don't find what you are seeking, please feel free to contact us and request that we post another auction for a different size.
CostaCoat Protectant High Gloss Sealer Protectant is a thin film polymer system. The first couple coats will penetrate and adhere to the base substrate, filling in micro pitting and erosion, that has caused degradation from the elements and UV (also known as oxidation). Once the base substrate has been filled, which will take one to three coats, the additional coats will begin to build a smooth, thin, even protecctive film...This will aid in protection, increase film thinkness, adding depth and shine.
Please take a look at my other listed items, should you wish to find different size kits or to purchase items individually.
Thank you for considering CostaCoat for your Paint, Gel Coat and Fiberglass protection needs.
Final note: I want to personally say “Thank you!” my loyal return customers and also my first time buyers, for your patronage. We are pleased to be providing you with quality products, and we know that without you, our company would not exist. We will continue to make every effort to make your buying experience a pleasurable one…We also make every effort to be there for you when you need us, to answer any questions you may have before and after the sale. Each project may have its own set of challenges, please feel free to contact us with any installation questions you may have. Your satisfaction is our #1 Goal!
Alternate spellings for this product: Costa Coat , CostaKote , Costa Kote , CostaCote , Costa Cote