Sizes are approximate and depends on the length of name
Please contact me if you would like the exact measurement
The decal measures about 20 inches high by 30 inches long
All letters are capitalized. Your decal will arrive as one piece.
Please contact me if you have a unique name or special request.
I will be happy to work with you!
How to apply your decal
Application Instructions Remove decal from box & lay image side face down on a table. Keep flattened overnight. It is much easier to work with when the decal is flat. Peel back the tape on each corner. Rub over the back of the decal with a hard but gentle edge like a large tongue depressor, plastic card, plastic scraper or plastic spatula. This helps the vinyl stick to the application tape. Starting from the corner, slowly peel off the backing paper leaving your decal on the application tape. If some of the vinyl does not want to stick to the tape, rub the area again until the vinyl sticks. Once your decal is on the tape, you can adhere it to your wall. Use 2 people for large decals. Place one edge of the decal onto the wall. From that edge, use your hand to smooth down the decal. Use your plastic tool and rub over the decal. Starting at one corner, slowly peel off the application tape. If your decal does not stick to the wall, rub the area again until it sticks. You're done! Enjoy.
Removal Instructions:
Vinyl is easy to remove. Just use a hair blow dryer to loosen the vinyl from the wall. Peel the decal away. If necessary, use a mild soap to remove any existing residue.
Vinyl lettering can be applied to most non-pourous smooth or semi-smooth surfaces. You may find some difficulty applying vinyl lettering to porous or chalk-like surfaces, such as stone, as well as painted surfaces in which a flat paint was used, or heavily textured walls. Vinyl lettering is not reusuable.
Thank you for choosing OneFunWall
I will be happy to assist you with any questions that you may have
Check out my Store for more Decor!