Model | D-120C | D-120B | ||
CH1 | CH2 | CH1 | CH2 | |
DC Voltage | 12V | 24V | 5V | 24V |
Voltage Tolerance | ±2% | ±6% | ±2% | ±7% |
Rated Current | 5A | 2.5A | 6A | 4A |
Current Range | 2-5A | 0.5-2.5A | 2-10A | 0.4-4A |
Rated Power | 120W | 120W | 126W | 126W |
Ripple & Noise | 60mVp-p | 120mVp-p | 60mVp-p | 150mVp-p |
DC Adjustment Range | -5%,+10% | -5%,+10% | ||
Setup,Rise,Hold Time | 200ms,50ms,20ms at full load |
INPUT
Voltage Range 88-132 VAC / 176~264VAC47~63 Hz;selected by switch 248-370VDC
AC Current 2.8A/115 V1.6A/ 230 V
Efficiency 78%(SKD-120A-CH1);78%(SKD-120A-CH2);80%(SKD-120A-CH1);80%(SKD-120A-CH2);
Inrush Current Cold start 35A
Leakage Current <3.5mA/240VAC
PROTECTION
Over Load 105%-135%
Protection type: Shut down o/p voltage , re-power on to recover
Over Voltage 115%-135%
Protection type: Shut down o/p voltage , re-power on to recover
ENVIRONMENT
Working Temp., Humidity -10°C-+60°C;20%~90 %RH
Storage Temp., Humidity -20°C-+85°C;10%~95 %RH
Vibration 10-500Hz,2G 10min/1cycle, period for 60min, each along X, Y, Z axes
SAFETY
Withstand Voltage I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG:0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC
STANDARD
Safety Standard Design refer t o 1950,TUV EN60950
EMC Standard Design refer to EN55022 (CISPR22), EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024
OTHERS
Weight 0.82Kg
NOTE:
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.