Technics1200s
"Your have the best... Treat it that way"
|
Up for Auction...
This Auction is for 2 Sets (Enough to do two Turntables) of
BLACK
5
Feet (1.524 Meters) Professional Performance RCA cables with Gold connectors & RCA PCB with Internal Ground Solder together. Cables are Oxygen Free RoHS compliant.
Note: We can make the length anything under 6ft by request. (Example 3ft, 4ft, 5ft). There is no signal loss with any length under 10ft with our professional cables.
This will fit the following models:
Technics 1200 or 1210 MK2, M3D, MK3D, MK4, MK5, MK6, M5G, GLD, LTD.
RCA PCB with Internal Ground.
We at Technics1200s.com are the original creators of the Internal Ground PCB for the Technics 1200 / 1210's. When designing them we took quality as our top priority and our feedback speaks volume. Use caution when considering fakes or replicas to avoid disappointment. If it does not say Technics1200s.com on them... they are not.
Several cables are simply to thick for the Technics 1200 / 1210. Thicker is not always best. What some do is remove the original spacer to fit these oversized cables leaving the clamper to take on all the stress. As we have seen over the years the clamper is not designed for this and with time gets weak causing the clamper to loosen leaving all the pressure on the tie strap and solder points.
Our Pro cables are the thickest while still respecting the original design.
Installation:
We have made it so the installation process is a smooth & simple procedure.
Tools Required: Phillips Screw Driver & Soldering Iron
Steps: Remove Rubber bottom cover, Remove RCA Clamper & Spacer, Remove Tone Arm Base Plate, De-solder 5 tone arm wires from old PCB and unscrew old PCB and remove it. Screw on your New Cables & PCB. Solder 5 Tone Arm Wires to PCB and Put it back together. Your all done!
Gold Plated Connectors.
Gold Plated Connectors for solid sound quality.
|