The STANLEY SmallCraft
The Peasemarsh 12

You could build this canoe in just a few hours a day for a week!!
(Plus painting and varnishing time)

You will receive printed DIY Plans, Instruction Manual with A3 drawings or choose Full Size Patterns option
Plus FREE email/text/phone help throughout your build.

Plans Option 1 - Printed package containing A3 workshop plans, A3 Drawings and full instructions


Plans Option 2 - Printed package containing large paper sheets of full size patterns for the Bottom, Side Planks, Bulkheads & Decks and full instructions 
(The full size patterns make it quicker and easier to get the panel shapes onto the plywood for cutting out.)

Prices include UK delivery


Canoe specifications:

Loa 12' - 6" (3.81m)
Beam 2' - 9" (0.84m)
Weight (apprx.) 45lbs (20kgs)
Max. Load (apprx.) 400lbs (181kgs)
Height at Bow/Stern 19"/19" (0.48m/0.48m)
 Height amidships 12" (0.30m)
Crew 1 plus 1

  
To build this canoe you will need:

3 sheets of plywood
3kg/ltr Epoxy Pack plus fillet (glue) additive 
Fibreglass Tape
Approximate Build Cost  -  £275 - £350


An open “Canadian” style canoe - 12' version.

With built-in buoyancy fore and aft that can be fitted with small round hatches for storage of valuables etc.
Can be built in either 4mm or 6mm plywood (6mm is recommended for the bottom) and requires between 20 and 30 hours to complete.

These canoes are ideal for a solo paddle but will also take 2 adults and some gear for day trip or weekend camp etc., or perhaps a day on the water for the kids. 
They go together quickly and easily and perform well on the water, being easy to paddle and track well. 
Although designed to be paddled while kneeling, seats can be fitted.

If you require a different size canoe of this design, plans for the 10', 14' and 16' versions are also available.

Free UK delivery

PLEASE NOTE.

In the case of any strike action by Royal Mail, we will use other options to get your order to you.



Any questions?
Contact us. Details under business seller information or use ebay system.

Please Note - we are still dispatching plans as normal but delivery may take a day or two longer wih current situation.



About Us - STANLEY SmallCraft

We've been doing what we do for 35 years now designing and building small boats plus producing DIY plans and quality kits allowing you to build your own boat.

We don't just leave you to get on with it either. We are available by email/text/phone/even WhatsApp to assist you if you get stuck or help you with customising your boat with your own ideas.


Whatever you are looking for, DIY canoe building plans, DIY dinghy building plans, build materials or perhaps some chandlery for your boat, we can help by either supplying it or pointing you in the right direction. 

​

We can help and advise you with your own project too and even cut it for you.

​

A lightweight plywood dinghy or canoe makes for an easier and cheaper, boating experience.

In the 8' to 10' range of boats, fibre glass dinghies, moulded plastic canoes and inflatables are all heavy and/or cumbersome. They require trailers to move them about on land and larger powered outboard motors to move them on the water. Some canoes can be carried on a roof rack but are heavy to lift up there and carry to the water.

​

Our plywood dinghies and canoes are designed to be lightweight, sometimes half the weight. A 10', 12' or 14' plywood canoe can be easily carried on a roof rack and can often be put up there solo as can an 8' dinghy. 10' dinghies and larger canoes will probably need two to move them about more because of size than weight.

Being lightweight, crew distribution is important to keep the boat balanced. They only need small, lightweight outboard motors which also helps to keep costs down.




.