OUR PLEDGE:
If we fail to ship this item within 24 hours of receiving proper payment, we will refund 100% of your money and ship this item to you absolutely free of charge.
If we fail to ship this item within 24 hours of receiving proper payment, we will refund 100% of your money and ship this item to you absolutely free of charge.
Godlyke CABLE GREEN STRAIGHT Large Plug Extension Jumper Adapter for Line 6
The Cable-Green Adaptor features a Male Barrel Plug with a larger, 2.5 mm Internal Diameter and reverse polarity. It can be used to power Line 6 Modeler pedals from the Power-All. It can also be used with pedals from other manufacturers such as Electro-Harmonix, Digitech, etc. that have a larger, 2.5 mm pin on their power jack.
The C-GN offers the following features
1 x Female Barrel jack to connect to Power-All or other power source (C-M/M & C-BL Cable may be required to connect C-GN to brick-style power supplies) 1 x straight Male Barrel plug with 2.5 mm I.D. and reverse polarity to connect to pedals or other cables Spring-loaded male plugs to reduce chance of disconnection
26-gauge Cable with oil-resistant vinyl sheath 10.5 (approx. 264 mm) Cable length between plugs NEW Lo-Pro Plug design offers the smallest plug dimensions possible in order to save space on your pedalboard and to make connection to your pedals quick, easy and efficient
power all low profile plug comparison SPECIFICATIONS Female Barrel Jack (1): 5.5 mm O.D., 2.1 mm I.D. Male Barrel Plug (1): 5.5 mm O.D., 2.5 mm I.D., 10 mm barrel length Cable: 26-gauge, OFC with oil-resistant vinyl sheath 10.5 (approx. 264 mm) Cable length between plugs TIPS Output polarity of C-GNs Male Barrel Plug will be the opposite polarity of source connected to Female Barrel Jack (i.e. if source is tip-negative, then C-GN output polarity will be tip-positive) Connect C-M/M Cable to C-GNs Female Barrel Jack to connect to brick-style power supplies or other sources with Female Power Output Jacks Connect Cable-Red to female end of the C-GN to reverse the output polarity of the Male Barrel plug Use C-Cap to cover unused Male Barrel Plug & prevent short-circuits NOTE Some pedals that require tip-positive polarity at their power input are actually wired with a positive ground to chassis. Some examples of this are the Fuzz Face & Tonebender and many boutique pedals based on these designs. Pedals with this ground configuration cannot be powered from a series power source (i.e. a Daisy Chain) along with pedals that have a negative ground to chassis. In this case, the GH-1 Ground Hound could be used on the positive-ground pedal to allow it to be powered along with negative-ground to chassis pedals off the same Daisy Chain. *Sum of current draws of pedals used should not exceed maximum output current of Power Supply.
C-GN
The Cable-Green Adaptor features a Male Barrel Plug with a larger, 2.5 mm Internal Diameter and reverse polarity. It can be used to power Line 6 Modeler pedals from the Power-All. It can also be used with pedals from other manufacturers such as Electro-Harmonix, Digitech, etc. that have a larger, 2.5 mm pin on their power jack.
The C-GN offers the following features
1 x Female Barrel jack to connect to Power-All or other power source (C-M/M & C-BL Cable may be required to connect C-GN to brick-style power supplies) 1 x straight Male Barrel plug with 2.5 mm I.D. and reverse polarity to connect to pedals or other cables Spring-loaded male plugs to reduce chance of disconnection
26-gauge Cable with oil-resistant vinyl sheath 10.5 (approx. 264 mm) Cable length between plugs NEW Lo-Pro Plug design offers the smallest plug dimensions possible in order to save space on your pedalboard and to make connection to your pedals quick, easy and efficient
power all low profile plug comparison SPECIFICATIONS Female Barrel Jack (1): 5.5 mm O.D., 2.1 mm I.D. Male Barrel Plug (1): 5.5 mm O.D., 2.5 mm I.D., 10 mm barrel length Cable: 26-gauge, OFC with oil-resistant vinyl sheath 10.5 (approx. 264 mm) Cable length between plugs TIPS Output polarity of C-GNs Male Barrel Plug will be the opposite polarity of source connected to Female Barrel Jack (i.e. if source is tip-negative, then C-GN output polarity will be tip-positive) Connect C-M/M Cable to C-GNs Female Barrel Jack to connect to brick-style power supplies or other sources with Female Power Output Jacks Connect Cable-Red to female end of the C-GN to reverse the output polarity of the Male Barrel plug Use C-Cap to cover unused Male Barrel Plug & prevent short-circuits NOTE Some pedals that require tip-positive polarity at their power input are actually wired with a positive ground to chassis. Some examples of this are the Fuzz Face & Tonebender and many boutique pedals based on these designs. Pedals with this ground configuration cannot be powered from a series power source (i.e. a Daisy Chain) along with pedals that have a negative ground to chassis. In this case, the GH-1 Ground Hound could be used on the positive-ground pedal to allow it to be powered along with negative-ground to chassis pedals off the same Daisy Chain. *Sum of current draws of pedals used should not exceed maximum output current of Power Supply.
C-GN
International Buyers Please Note - Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs/import office to determine what these additional costs will be prior to purchasing. Some of our listings may offer eBay's Global Shipping Program (GSP) as the international shipping method. GSP may include some import charges, please see eBay's terms for this program
