For Yamaha FZ6 FZ6N 2004-2009 HID Projector Custom Headlight Assembly

55W 300% Brighter than Stock Headlight 

Audi Style LED Daytime Running Light

Low Beams + High Beams

Easy Installation, Directly Replace Stock Headlight
 

 

1. Parameters of HID bulb 

    Starting Voltage:  23 KV

    Rated Power:  55W 

    Luminous: 3500LM

    Bulb Life-span:  3500H

   Color Temperature:  6000K  ( noon light white color)

2. Parameters of Angel Eye ( built inside the projector)

    Input Voltage:  12V 

    Rated Power:  3W

    Life-span:   25000H 

    Color: White

3. Parameters of Demon Eye ( built inside the projector)

    Input Voltage:  12V 

    Rated Power:  3W

    Life-span:   25000H 

    Color: Blue

4. Application:Yamaha FZ6 FZ6N 2004-2009, directly replace the OEM headlight.

 

5. Packing List

    1 X Headlight Assembly Yamaha FZ6 FZ6N 2004-2009

    1 X HID Projector with HID bulb  

    1 X 55W High Quality Extra Slim HID Ballast

    1  X LED Angel Eye with igniter

    1  X LED Demon Eye with igniter

    1 X Relay Wiring Harness ( connect to the battery and original high/low beam switch)

 

---

 Frequently Asked  Questions

1. What’s angel eye?

The angel eye is the LED light attached around the projector lens, it will  be light up by using angel eye inverter (igniter). Normally, several  different colors are available for the angel eyes, such as White, Blue,  Red, Green and Yellow. You can choose one desired color among those.


2. What’s demon (devil) eye?

The demon (devil) eye is the LED light built inside the projector lens, it  will be light up by using demon eye inverter (igniter), different from  angel eye, and the demon eye light will emitting out from the projector  lens. In most case, the demon eye will be light up at the same time with angel eye. Demon eye light will be disappeared once the main light has  been turn on. When the main light be turned off, demon eye appears  again! Normally, several different colors are available for the demon  eyes, such as Blue, Red and Green. You can choose one desired color  among those.

3. How does the angle eye or demon eye work?

It will be light up by using angel eye /demon eye inverter (igniter), and  normally it will be connected to the driving light. It can also be used  as daytime running light.

4. Which bulb color shall I choose?

Many people believe that the higher the color temperature the brighter the  lamp. This is totally wrong. The color temperature is purely a scale to  measure the color of the light output. It is a reference purely for  color and could equally be called White, Green or Blue.

The reality is the higher up the scale the lamps  are the less bright they become. 6000K lamps are approx 5-10% brighter  (measured in Lumens, not degrees K) than the 8000K. 4300K has better  penetration compare with 6000K, particalur in the rainy day or mist  days. And 6000K is the best combination of the color and brightness!   8000K and 10000K looks cool and attractiveness with quite satisfied  light output, much brighter than stock halogen bulb.
Degrees K = only color    Lumen = Brightness   

5. Do I need to buy extra accessory to complete the installation? 

The HID projector headlight assembly  has included all necessary  accessories you need for installation.Headlight assembly HID projector,  HID bulb, HID Ballast, wiring harness, angel eye and demon eye  (optional).

6. Can I install it by myself?

We suggest this custom headlight assembly be installed by professional  mechanic to ensure the performance. If the retrofitter familiar with the lighting system, and consider the high labor costs, retrofitter may do  it by themselves and following the instruction manual.

7. How long for the warranty? How can I claim the warranty if defective found, do I need to send back the defective item?

One year warranty will be offered for the custom headlight , if the  defective (malfunction) is found during the warranty period, we will  provide free spare parts to replace the defective one, consider the high shipping cost and customer tax, we don’t need our customers send back  defective item to us, in most cases, we will require customers to send  pictures or video to proof the defective or malfunction. Shipping costs  for replacement spare parts will be borne on customer’s side. If  defective (malfunction) is found after the warranty period, we can also  provide spare parts with reasonable price.