This listing comes with a removeable picatinny plate preassembled on the optic, and a pistol plate fits certain SW models
This pistol mount will fit:
- M&P Pistol – All
- M&P Shield Pistol – All
- M&P M2.0 Pistol – All
- M&P M2.0 Shield Pistol – All (not compatible with .380 EZ)
- M&P M2.0 Compact Pistol – All (not compatible with .22 version)
- SD series Pistol – All , Including SD9, SD9VE, SD40, SD40VE.
This pistol mount does not fit:
Smith & Wesson M&P C.O.R.E Series (Already optics ready)
Smith & Wesson M&P Shield EZ .380
Smith & Wesson M&P .22 Compact
Smith & Wesson SW9VE, SW40VE, Sigma, SW9, SW40
Fully shockproof and fogproof.
Waterproof guranteed for 30 minutes under 1.7feet
Lenses are precision ground and polished to
exacting geometries to virtually eliminate parallax and to provide a very
clear, crisp sight picture
Fully windage and elevation adjustable and
lockable
5 MOA
5 Illumination Settings.
Powered by a lithium CR2032
battery(Included)
Magnification: 1X
Sight Window: 25mm x 16mm; .98" x .62"
Elevation Adustment Range: 3° or 190"
@ 100 yds (524 cm @ 100 m)
Windage Adjustment Range: 3° or 190" @
100 yds (524 cm @ 100 m)
Set Value for One Scale Division: 1 MOA or
1" @ 100 yds with 60 scale divisions per turn
Subtension of the Aiming Dot: 4 MOA (10.5
cm @ 100 m)
Parallax-Free Sighting Distance: approx. 50
yds
Recoil Resistance: At least 1000 Gs
Operating Temperature Range: -10°F to
+130°F (-25°C to +55°C)
Storage Temperature Range: -40°F to +160°F
(-40°C to +70°C)
Power Supply: 3V with one CR 2032 Lithium
battery
Dimensions: L 2.0" x W 1.0" x H 1.1"
(52 mm x 26 mm x 28 mm)
Weight (in operating condition without
mounting materials): 0.9 oz (25 g).
Included:
Allen wrench to tighten fasteners
Screwdriver
Adjusting disc
Protective cap
3V Lithium battery (CR 2032)
Operating instructions
Weaver/Picatinny-style mount
Mounting plate for Smith Wesson MP
Extra rubber sealing ring for battery compartment
Ade Advanced Optics 1 Year USA warranty
- It also fits C.O.R.E., however, you need o use 6/32x5/8 cap screws to mount red dots like vortex to a SW MP C.O.R.E. The 6/32x5/8 cap screws are not included, you can get it from a local hardware store like homedepot for less than a quarter. This adapter when used on the S&W M&P C.O.R.E. fits on top of the slide assembly without removing the top plate.
It requires 5/8 screws that go through the sight, the mounting plate, the top plate on the slide and into the slide of the firearm. If someone has the #5 plate the gun comes with ( I don't ) they would not need your adaptor and they would mount the sight to the slide using just the #5 plate and not the cover plate that is in place when you are not using any optics