Specification:

  • Power Input: 100 ~240VAC, 50Hz/60Hz
  • Power Output: Max. 10A, 100V ~240V AC
  • Humidity Measuring Range : 5%-99.99%RH
  • Humidity Control Range : 5%-99%RH
  • Resolution: 1%RH
  • Accuracy: ±3%RH
  • Input Power Cable Length: 1.5m (5ft)
  • Output Power Cable Length: 30cm (1ft)
  • Dimension: Body: 140x68x33mm (5.5x2.7x1.3inch)
  • Socket: 85x42x24mm(3.3x1.7x1inch)
  • Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
  • Storage: Temperature : -30~ 75 ° C / -22~ 167 ° F ; Humidity 20~85% (No Condensate)
If you want to maintain the humidity from 47% to 55%

Main Features:

  • Multifunction: humidification dehumidification
  • Humidity calibration
  • Hysteresis function
  • Humidity correction
  • Delay protection
  • Alarm when sensor error or humidity exceeds the limit
  • Use Humirel Humidity sensor HTG3535CH
  • The probe is WATERPROOF that can prevent the liquefaction of gases such as mist and water vapor.

 

Set "HS" (Traget Humdity) as 50.

  • Switch on the power
  • Press the "SET" button for 3 seconds to "HS" humidity setting
  • Press the up or down button to adjust the humidity to 50%

Set "HD" (Humidification Differential Value) as 3.

  • Press the "SET" button to select "HD"
  • Press the up and down button to adjust the humidity to 3%

Set "DD" (Dehumidification Differential Value) as 5.

  • Press the "SET" button to select "DD"
  • Press the up and down button to adjust the humidity to 5%

Mode

  • Switch the modes between humidification and dehumidification automatically.

Application:

  • This humidity controller is widely used in reptile humidifiers/dehumidifiers, greenhouses, grow rooms, mushroom houses, and biltong making.

What You Get:

  • 1x IHC-200 Humidity Controller
    1x Humidity Sensor

Solid Sockets

  • Power Output: Max. 10A, 100V ~240V AC
    Work 1:To control the humidifier
    Work 2:To control the dehumidifier

 

On 26/02/2024 at 02:23:30 AEDT, seller added the following information:

DataCaciques