TEC2-19003 3A 12V 35W 30x30x6.5mm Thermoelectric Cooler Peltier Plate ModuleUSD 22.98
20Pcs SW-18015D High Sensitivity Spring Electronic Vibration Sensor SwitchUSD 4.46
30Pcs SW-36010P Straight Terminal High Sensitivity Vibration Sensor SwitchUSD 3.08
20Pcs SW-18030 More Slow Sensitivity Spring Electronic Vibration Sensor SwitchUSD 2.48
30Pcs SW-58010P High Sensitivity Electronic Vibration Sensor Switch Silver ToneUSD 3.04
30Pcs SW-58015P Sensitivity Electronic Vibration Sensor Switch Silver ToneUSD 3.09
Shop Category
- For Sale
- Socket Promotion
- DC Power Converter Regulator
- Lights
- other
- Pressure Instrument
- Optical Instrument
- Temperature Instrument
- Measuring Instrument
- Laboratory Apparatus
- Tool Machine Accessory
- Molding
- Heavy Equipment Parts
- Manufacturing
- Water Flow System
- Pneumatics
- Hydraulics
- General Industrial Parts
- Electronic Parts & Components
- Mains/Power Distribution Equip
- Low-voltage Apparatus
- Electrical Instruments
- Heat Elements
- Insulating Materials
- Antistatic Materials
- Batteries
- Plugs
- Sockets
- Power Supply
- Relays
- Motors
- Switches
- DIY Accessories
- Other
New List Item
20Pcs SW-18030 More Slow Sensitivity Spring Electronic Vibration Sensor Switch
USD 2.48
30Pcs SW-58010P High Sensitivity Electronic Vibration Sensor Switch Silver Tone
USD 3.04
TEC2-19003 3A 12V 35W 30x30x6.5mm Thermoelectric Cooler Peltier Plate Module
USD 22.98
TEC1-12704 12V 30W Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
USD 12.97
30Pcs SW-58015P Sensitivity Electronic Vibration Sensor Switch Silver Tone
USD 3.09
TEC1-12715 15A 12V 72W 40x40mm 65C Semiconductor Thermoelectric Cooler Peltier
Descriptions:
Dimension:
Internal Structure:
Installation:
This cooling Peltier cell is very simple to install and use.
1.Before installation, you must provide a dry environment and allow for any condensation from the cold side to drain away and not to come in contact with the operating cell.
2. Connect the two leads of the Peltier cell to an appropriate power supply and importantly, observe the correct lead polarity and attach an adequate heat-sink with a quality thermal conducting grease applied to the warm side of the cell; you will feel the warm side and the opposite cool side of the operating cell. It is important to identify both the correct lead polarity and the cooling/heating sides of the device.
3.If you want a greater cooling differential, it is recommended to use two Peltier cells, namely, one stacked above the other with the hot side of the upper cell in contact with the cool side of the lower one; an experiment proved the two stacked cell cooling effect is much better than the single-stage. Similarly a three cell stack produces an even greater temperature differential but requires a larger capacity power supply support.
Applications:
- Connected to a 12V power supply the plate will have a temperature differential between the two sides of about 65 Degrees Celsius.
- Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
- Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts
- These devices must be used in conjunction with a heat sink to avoid burned
- Each device is full inspected and tested.
Dimension:
| L | W | T |
| 40mm | 40mm | 3.5mm |
Internal Structure:
How to test the Thermoelectric Cooler Peltier ?
After a long shipment or some inappropriate operation, the peltier may be damaged, there's a simple way to test if the peltier working or not.
1. One hand hold both sides of the Thermoelectric Cooler Peltier;
2. Another hand hold the both wire, connect the two leads of the Peltier cell to an appropriate power supply and importantly, observe the correct lead polarity;
3. You will feel the warm side and the opposite cool side of the operating cell;
Note:
- It is important to identify both the correct lead polarity and the cooling/heating sides of the device.
- Do not connect the cell to a power supply for more than 2 seconds without a heat-sink on the hot side otherwise there will be internal overheating and destruction of the Peltier Cell.
- The product in the picture just for your reference.
Installation:
This cooling Peltier cell is very simple to install and use.
1.Before installation, you must provide a dry environment and allow for any condensation from the cold side to drain away and not to come in contact with the operating cell.
2. Connect the two leads of the Peltier cell to an appropriate power supply and importantly, observe the correct lead polarity and attach an adequate heat-sink with a quality thermal conducting grease applied to the warm side of the cell; you will feel the warm side and the opposite cool side of the operating cell. It is important to identify both the correct lead polarity and the cooling/heating sides of the device.
3.If you want a greater cooling differential, it is recommended to use two Peltier cells, namely, one stacked above the other with the hot side of the upper cell in contact with the cool side of the lower one; an experiment proved the two stacked cell cooling effect is much better than the single-stage. Similarly a three cell stack produces an even greater temperature differential but requires a larger capacity power supply support.
Applications:
Item Specifics
| Output Refrigeration Power | 72W |
| Temperature | 65C |
| Total Size | 40 x 40 x 3.5mm/1.6" x 1.6" x 0.14"(L*W*T) |
| Max. Current | 15A |
| Max. Voltage | 12V |
| Wire Length | 15cm/6" |
| Country of Manufacture | CHINA |
| Material | Ceramic, Electric Parts |
| Net Weight | 31g |
| Package Content | 1 x Thermoelectric Cooler Peltier |
| Brand | DMiotech |
| Model | TEC1-12715-45H59D |
Hot Item
- 30Pcs SW-58015P Sensitivity Electronic Vibration Sensor Switch Silver ToneUSD 3.09
- 30Pcs SW-58010P High Sensitivity Electronic Vibration Sensor Switch Silver ToneUSD 3.04
30pcs BL-630 Vibration Sensors Spring Type Tilt Shaking Trigger SwitchUSD 4.62- TEC1-12704 12V 30W Heatsink Thermoelectric Cooler Cooling Peltier Plate ModuleUSD 12.97
- 20Pcs SW-18030 More Slow Sensitivity Spring Electronic Vibration Sensor SwitchUSD 2.48
- We ONLY accept Paypal.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- Our US warehouse allows us to ship you the best products quickly and accurately. We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
TEC1-12715 15A 12V 72W 40x40mm 65C Semiconductor Thermoelectric Cooler Peltier
Descriptions:
Dimension:
Internal Structure:
Installation:
This cooling Peltier cell is very simple to install and use.
1.Before installation, you must provide a dry environment and allow for any condensation from the cold side to drain away and not to come in contact with the operating cell.
2. Connect the two leads of the Peltier cell to an appropriate power supply and importantly, observe the correct lead polarity and attach an adequate heat-sink with a quality thermal conducting grease applied to the warm side of the cell; you will feel the warm side and the opposite cool side of the operating cell. It is important to identify both the correct lead polarity and the cooling/heating sides of the device.
3.If you want a greater cooling differential, it is recommended to use two Peltier cells, namely, one stacked above the other with the hot side of the upper cell in contact with the cool side of the lower one; an experiment proved the two stacked cell cooling effect is much better than the single-stage. Similarly a three cell stack produces an even greater temperature differential but requires a larger capacity power supply support.
Applications:
- Connected to a 12V power supply the plate will have a temperature differential between the two sides of about 65 Degrees Celsius.
- Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
- Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts
- These devices must be used in conjunction with a heat sink to avoid burned
- Each device is full inspected and tested.
Dimension:
| L | W | T |
| 40mm | 40mm | 3.5mm |
Internal Structure:
How to test the Thermoelectric Cooler Peltier ?
After a long shipment or some inappropriate operation, the peltier may be damaged, there's a simple way to test if the peltier working or not.
1. One hand hold both sides of the Thermoelectric Cooler Peltier;
2. Another hand hold the both wire, connect the two leads of the Peltier cell to an appropriate power supply and importantly, observe the correct lead polarity;
3. You will feel the warm side and the opposite cool side of the operating cell;
Note:
- It is important to identify both the correct lead polarity and the cooling/heating sides of the device.
- Do not connect the cell to a power supply for more than 2 seconds without a heat-sink on the hot side otherwise there will be internal overheating and destruction of the Peltier Cell.
- The product in the picture just for your reference.
Installation:
This cooling Peltier cell is very simple to install and use.
1.Before installation, you must provide a dry environment and allow for any condensation from the cold side to drain away and not to come in contact with the operating cell.
2. Connect the two leads of the Peltier cell to an appropriate power supply and importantly, observe the correct lead polarity and attach an adequate heat-sink with a quality thermal conducting grease applied to the warm side of the cell; you will feel the warm side and the opposite cool side of the operating cell. It is important to identify both the correct lead polarity and the cooling/heating sides of the device.
3.If you want a greater cooling differential, it is recommended to use two Peltier cells, namely, one stacked above the other with the hot side of the upper cell in contact with the cool side of the lower one; an experiment proved the two stacked cell cooling effect is much better than the single-stage. Similarly a three cell stack produces an even greater temperature differential but requires a larger capacity power supply support.
Applications:
Item Specifics
| Output Refrigeration Power | 72W |
| Temperature | 65C |
| Total Size | 40 x 40 x 3.5mm/1.6" x 1.6" x 0.14"(L*W*T) |
| Max. Current | 15A |
| Max. Voltage | 12V |
| Wire Length | 15cm/6" |
| Country of Manufacture | CHINA |
| Material | Ceramic, Electric Parts |
| Net Weight | 31g |
| Package Content | 1 x Thermoelectric Cooler Peltier |
| Brand | DMiotech |
| Model | TEC1-12715-45H59D |
- TEC2-19003 3A 12V 35W 30x30x6.5mm Thermoelectric Cooler Peltier Plate ModuleUSD 22.98
- 20Pcs SW-18015D High Sensitivity Spring Electronic Vibration Sensor SwitchUSD 4.46
- 30Pcs SW-36010P Straight Terminal High Sensitivity Vibration Sensor SwitchUSD 3.08
- 20Pcs SW-18030 More Slow Sensitivity Spring Electronic Vibration Sensor SwitchUSD 2.48
- 30Pcs SW-58010P High Sensitivity Electronic Vibration Sensor Switch Silver ToneUSD 3.04
- 30Pcs SW-58015P Sensitivity Electronic Vibration Sensor Switch Silver ToneUSD 3.09
Hot Item
- 30Pcs SW-58015P Sensitivity Electronic Vibration Sensor Switch Silver ToneUSD 3.09
- 30Pcs SW-58010P High Sensitivity Electronic Vibration Sensor Switch Silver ToneUSD 3.04
- 30pcs BL-630 Vibration Sensors Spring Type Tilt Shaking Trigger SwitchUSD 4.62
- TEC1-12704 12V 30W Heatsink Thermoelectric Cooler Cooling Peltier Plate ModuleUSD 12.97
- 20Pcs SW-18030 More Slow Sensitivity Spring Electronic Vibration Sensor SwitchUSD 2.48
- We ONLY accept Paypal.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- Our US warehouse allows us to ship you the best products quickly and accurately. We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
On Dec-28-17 at 09:28:09 PST, seller added the following information: